Page 1 of 1
Size of Throttlebodies
Posted: Wed Jan 03, 2007 7:17 pm
by SiberianNeon0
What size TB is on a 2002 R/T neon?
What size TB is on a 2002 SXT neon?
Posted: Wed Jan 03, 2007 7:32 pm
by SlvrACR
Same 49mm. Only difference I believe is the spring.
no gain?
Posted: Wed Jan 03, 2007 7:48 pm
by SiberianNeon0
So obviously, there would be no gains from swapping out the TBs?
Posted: Wed Jan 03, 2007 9:15 pm
by J-Villa
exactly lol.....get a 60mm tb....even though most will argue it doesn't gain anything unless you have some serious mods
Posted: Wed Jan 03, 2007 9:26 pm
by SlvrACR
The 60mm throttle response is unreal though
Posted: Wed Jan 03, 2007 9:33 pm
by neonpla
^^ what he said
Posted: Wed Jan 03, 2007 9:56 pm
by Diablo0
SlvrACR wrote:The 60mm throttle response is unreal though
ditto
You'll only gain roughly 3whp with a TB but the throttle response is very nice!
Seriously?
Posted: Wed Jan 03, 2007 10:58 pm
by SiberianNeon0
I have bolt-ons...what do you mean by "serious" mods?
I have:
headers, muffler, underdrive pulley, plugs/wires, & short ram intake
Would you say I should get one off of Modern Performance or Howell?
Posted: Thu Jan 04, 2007 11:03 am
by Canada
Modern Performance or Lorenzo. Def. not Howell.
Posted: Fri Jan 05, 2007 12:56 am
by Diablo0
I'd go with the MPx but by serious mods he would mean things like a different cam, valves, ported head, turbo or N/A build... things that you just don't buy off the shelf and stick on in an hour or two. Follow me?
Posted: Fri Jan 05, 2007 7:10 am
by SlvrACR
Also look at the Zzapp one. They are the same as the MPx one but without the modern logo inside the butterfly
waste?
Posted: Fri Jan 05, 2007 12:48 pm
by SiberianNeon0
I have a R/T cam with the new valvesprings too...
But I guess I don't have serious mods...maybe this would be a waste?
Posted: Fri Jan 05, 2007 4:03 pm
by white2000neon
I would get it for throttle response. I can cruise at 55mph with my foot just literally resting on the pedal. I think that the stockers on the 2gn are 52 or 53mm i know the 1st gens are 49 for a mtx and 52 or 53mm for an atx, but all 2gns are the same.