2GN.ORG

So when i bought me car it came with a short ram intake and i was lookin in the engine bay and well i noticed one cut wire and 2 wires comin out of a harness and i dont know where they should go



i notcied he capped them off with the red clips

this is where it comes from......



and then this is another spliced wire


it goes to the sensor the plugs into the Short Ram i think its a brown wire with a red stripe

could this be causeing the engine code that says ambient air temp high?


any input and solutions would be nice and greatful

I don't see an Intake Air Temp (IAT) Sensor. If that is missing, then that could very easily be your problem.

Hit a junkyard and grab one off of an 00-02 or 03+ (whichever category your car falls into). There may be a difference, but I'm not sure. I'm sure you could get one at a dealer as well, hopefully you wouldn't have to buy the whole harness to do it that way

where does it plug into when i get it fixed...if that is the problem....and any idea wat the brown/red stripe
wire is

Shoot, I may have mis-spoke. Can you take a pic of the sensor that is plugged into the short ram right next to the filter on the side towards the battery. Like pull it out and take a pic of it.

When I get home I'll look at my car to see if there are any other wires in that area and what they plug into.

keep in mind this is on an '03 SRT that he's asking this on. The plug looks familiar but I can't place it..

Could it be one of those sensors that are normally attached to the air box?


also, could you post your car info in either the garage or your sig. i didn't know that i was looking at an srt and would have been really confused later

yea its an 03......and ive been demoted to a girl by diablo

and yea i can take more pics later no prob

bad Jason, thought those looked like some masculine girl hands

yea ill update my sig and garage lol i gota alot of things goin on lol not alot of time :p im acctually about to disappear to work


lol hmm maybe i should go play with some bad dogs and get my hands beat up some more....didnt know they looked like million dollar model hands.....i now know my purpose in life hand model

Do'h, I read the username "trinity" and think of the other trinity. I'll learn... slowly lol

dont stress it....im off to play photographer

that is just too much of a coincidence

theres a pic of the sensor im assuming IAT sensor and that also answers my brown wire ? it broke off of it some how???? anyone know where i can pic one up at???

The wire is out of the connector, correct? If I'm thinkin' right it needs two wires. If that's the case you'll need to get one from a JY or see your dealer for a replacement pigtail. If you have lots of paitence and can work with small stuff you may be able to disassemble the connector and solder the wire back onto the pin and reassemble the connector. But I think pigtails are about $20 ish but don't hold me to that. Danteneon could get you a correct PN#/price. The sensor itself is cheap. IIRC the NGC's also have an ambient sensor in the battery blanket, so you prolly aren't getting a battery light like us 00-02 ppl would.

well im assuming i have the IAT sensor just the brown wire needs to be soldered back on that or get a new one

now the connector that has the 2 red wire crimps that is the one that has me at a lost....does anyone have any idea?

Yep, the last pic is the IAT sensor. The other two may be to fog lights that the previous owner installed bullet connectors to instead of the OEM connector. Just a guess...

idk possibly but my stock fogs work and those connectors go str8 into the engine bay harness

so nobody know what the pic is with the two wire crimps r?