1st gen TB bolts up to 2nd gen??

blackflame · Post by **blackflame** » Mon Aug 25, 2008 11:18 pm

Yeah, so I'm trying to find out if the 1st gen throttle body will bolt up directly to the 2nd gen. I found a 52mm throttle body from a 1st gen that I would like to use on my 2nd gen with a 49mm throttle body.

let me know.

thanks.

Swordfish2Cowboy · Post by **Swordfish2Cowboy** » Mon Aug 25, 2008 11:27 pm

Post by **occasional demons** » Mon Aug 25, 2008 11:57 pm

Swordfish2Cowboy wrote:Yes.

No a 1gn won't bolt up, and your 2gn is already 52 mm.
But you could do this: http://forum.2gn.org/viewtopic.php?t=14 ... ottle+body

blackflame · Post by **blackflame** » Tue Aug 26, 2008 9:25 am

thanks for the help guys. Can someone explain what the half shaft mod is? Never heard of it before. I read the How-to but it didn't explain what it was.

btw, just to make sure the 2nd gen MTX neons already have the 52mm TB? Which would still be better over the 60mm right?

Post by **occasional demons** » Tue Aug 26, 2008 9:33 am

The halfshaft is cutting the throttle shaft down to increase air flow, mainly at WOT. A 60mm is better for performance. And all 2gn TB's are 52mm. EDIT:(except SRT's)