how to: alternator belt removel
Posted: Fri May 28, 2010 1:10 pm
trying to find the bolts needed to losen it up ...
2GN.ORG
The best source for the Second Generation Neon - Period.
https://forum.2gn.org/
how to: alternator belt removel
Page 1 of 1
Posted: Fri May 28, 2010 1:16 pm
Posted: Fri May 28, 2010 1:51 pm
You need a haynes
Posted: Fri May 28, 2010 1:59 pm
Mat00ES wrote:You need a haynes
How dare you suggest such a book that is hardly worthy of being toilet paper, let alone a so called service manual?
If you couldn't tell, I think the Haynes is junk. Get a real manual.
Posted: Fri May 28, 2010 2:22 pm
Couldn't agree more, FSM FTW!
Loosen the bolt/nut that secure the alternator ears to the engine bracket. Then use the nut on the threaded rod to loosen or tighten the belt. Done and done.
Loosen the bolt/nut that secure the alternator ears to the engine bracket. Then use the nut on the threaded rod to loosen or tighten the belt. Done and done.
Posted: Fri May 28, 2010 3:29 pm
^^ This
Posted: Sat May 29, 2010 8:12 am
There are two bolts on the alternator bracket when you look behind it, The one on the left side of the bracket, locks the alternator in place, the bolt facing the firewall adjusts the tension on the belt.. loosen it and then pull the alternator towards the motor, voila belt comes off. you'll need a 13mm and 15mm wrench, or socket if you can fit one in there.
Posted: Sat May 29, 2010 9:00 am
Haha Its gives me just enough useless info to get the job done. Plus I paid $2 for the thing.