what would i be looking at for HP

blue_streak95 · Post by **blue_streak95** » Tue Aug 10, 2010 1:12 pm

planning on doing a magnum swap in my 00 neon MTX this tax season so i was wodering what kind of HP i would be sitting at with the following mods:

magnum head street ported from amm.
ghetto blaster
obx short tube header with 2.25 cat back

also what would be a good cam for some gains with these mods?

JRM · Post by **JRM** » Tue Aug 10, 2010 1:17 pm

Best guess would be between 120-140hp. Good cam would be crane 12 or 14.

Post by **occasional demons** » Tue Aug 10, 2010 1:47 pm

It will also depend on the quality/style of said ghetto blaster IM.

INVUJerry · Post by **INVUJerry** » Tue Aug 10, 2010 2:38 pm

blue_streak95 wrote:planning on doing a magnum swap in my 00 neon MTX this tax season so i was wodering what kind of HP i would be sitting at with the following mods:

magnum head street ported from amm.
ghetto blaster
obx short tube header with 2.25 cat back

also what would be a good cam for some gains with these mods?

I'd get a longtube, not a shorttube, and a 2.5" catback.

blue_streak95 · Post by **blue_streak95** » Tue Aug 10, 2010 3:14 pm

ok well lets say a 12 cam..with a long tube header...and a average ghetto blaster..

lilnicko11 · Post by **lilnicko11** » Tue Aug 10, 2010 3:45 pm

at the crank id say 140-160ish. at the wheels. well subtract 20-30

INVUJerry · Post by **INVUJerry** » Tue Aug 10, 2010 3:58 pm

Probably mid 130-140's to the wheels. The cam and the ECU you're running will hold you back.

Do a crane 14, and and AFX ecu (and an SAFC to tune the idle) and you're looking at 140-160WHP.

blue_streak95 · Post by **blue_streak95** » Tue Aug 10, 2010 5:40 pm

nice thats what im talking about hehe shud be a good daily driver.

stdlystdmufn · Post by **stdlystdmufn** » Wed Aug 11, 2010 2:30 pm

if you need one i have a SAFC 2, don't need it now that im goin MS

2GN.ORG

what would i be looking at for HP

what would i be looking at for HP

Re: what would i be looking at for HP