Where to get a specific intake manifold

This is the place to ask questions about your engine components like cams, valves, pistons… just anything that is generally "engine" specific. This also includes questions about exhaust systems such as exhaust manifolds, piping size, mufflers, ect...
Post Reply
inthewerks
2GN Member
Posts: 58
Joined: Fri May 30, 2008 9:49 pm

Where to get a specific intake manifold

Post by inthewerks » Thu Jun 09, 2011 11:53 pm

Hey all. There a member on this forum (maybe more than one), who had a pic of an intake manifold that I want for my car and I dont know the name of it or where to buy it. It is polished aluminum I think, and the manifold itself kind of looks like a barrel or fat tube. It has very short runners that bolt onto the head. I hope my description is specific enough for you guys to figure out what I am talking about. If you know, can you tell me where I can purchase one? Thanks. :rockon:
Image
Wheel gap? Never heard of it.

User avatar
hp4lyfe
2GN Member
Posts: 139
Joined: Thu Apr 22, 2010 6:39 pm
Location: mesa,az

Post by hp4lyfe » Thu Jun 09, 2011 11:59 pm

you must be talking about the lone wolf im.
Para todos todo, para nosotros nada

Official "I'm Going to Drive My Neon till it Dies" Club #114

Kelevra
2GN Member
Posts: 1399
Joined: Sun Apr 29, 2007 2:31 pm

Post by Kelevra » Fri Jun 10, 2011 12:00 am

or an all-motor mike one :thumbup:

User avatar
hp4lyfe
2GN Member
Posts: 139
Joined: Thu Apr 22, 2010 6:39 pm
Location: mesa,az

Post by hp4lyfe » Fri Jun 10, 2011 12:01 am

Para todos todo, para nosotros nada

Official "I'm Going to Drive My Neon till it Dies" Club #114

Kelevra
2GN Member
Posts: 1399
Joined: Sun Apr 29, 2007 2:31 pm

Post by Kelevra » Fri Jun 10, 2011 12:02 am

Image

Spanky has an AMM (all-motor Mike) intake

inthewerks
2GN Member
Posts: 58
Joined: Fri May 30, 2008 9:49 pm

Post by inthewerks » Fri Jun 10, 2011 12:13 am

I saw something different but the closest relation I found after researching both the lone wolf and the AMM was it looks alot like the lone wolf one. Are those intake mani's available for the 2.0? The info I saw on the sight relates to a 2.2 or 2.4 for dodge.
Image
Wheel gap? Never heard of it.

DodgeEvo
2GN Member
Posts: 879
Joined: Mon Apr 18, 2011 2:33 pm
Location: Cape Cod, Ma

Post by DodgeEvo » Fri Jun 10, 2011 7:58 am

I am looking for the same thing for my 05. I got hold of Lone Wolf Performance and waiting for a price. I looked for all motor mike online and didn't really see anything. How would I get a hold of him(all-motor mike)

User avatar
gtxtreme19
2010 Silver Contributor
Posts: 2061
Joined: Tue Jan 26, 2010 3:02 pm
Location: 43554 NW ohio

Post by gtxtreme19 » Fri Jun 10, 2011 8:22 am

AMM INTAKES

A whole buncha pictures in there to give you and idea.
-Mike
Midnight_Rider wrote:
Skitlz wrote:Gramps, get a GPS.
Gramps Prefers Streetmaps. :D

racer12306
Junior Admin
Posts: 16015
Joined: Sun Oct 24, 2004 8:53 pm
Location: Baltimore, MD
Contact:

Post by racer12306 » Fri Jun 10, 2011 9:54 am

You have to contact AMM directly through PM on here or neons.org.

Just a heads up about AMM, he traditionally has extremely slow response times. I do not have any personal experience with him but I have seen many unsatisfied customers due to time.
-Frank
Member of Spork Racing
Forum issues: racer12306@2gn.org
Forum Behavior
Support your favorite forum, DONATE!

DodgeEvo
2GN Member
Posts: 879
Joined: Mon Apr 18, 2011 2:33 pm
Location: Cape Cod, Ma

Post by DodgeEvo » Fri Jun 10, 2011 11:57 am

Sent him a pm and I have time to wait, because I have my car in the body shop and I only work on it when I have time after work. :rockon:

heydockyle
2011 Silver Contributor
Posts: 4829
Joined: Mon Jul 14, 2008 6:09 pm
Location: Uniontown, Pennsylvania

Post by heydockyle » Fri Jun 10, 2011 12:09 pm

AMM has a dealer section on neons.org and is very backed up right now so he isn't taking any more orders.

He's slow at times but I don't think anyone has ever complained about his item's quality.
Image
05 OB SRT-4 - AGP Stg 3 Delta 44 Turbo w/ Supporting mods
98 Platinum Coupe - 2.4 Swap
98 Flame Red Sedan - DD Slow
98 Sport Coupe - Totaled
05 SXT - Sold

quicksilvr
Former Moderator
Posts: 3230
Joined: Fri Jul 30, 2004 7:19 pm
Location: St. Joseph, MO
Contact:

Post by quicksilvr » Fri Jun 10, 2011 1:02 pm

I don't even think Lonewolf is in business. If they are, I wouldn't use them. Their main fabricator that made all that sweet stuff they have pictures of on their website doesn't work there any more.
-Dave
Image
2001 Dodge Neon R/T

inthewerks
2GN Member
Posts: 58
Joined: Fri May 30, 2008 9:49 pm

Post by inthewerks » Fri Jun 10, 2011 8:03 pm

Dagnabbit!!! So probably looks like either wait for one to go on sale in the boards, or go with a r/t manifold and drive myself batty trying to figure out the wiring for the secondaries. I am an electrician by trade, but when it comes to auto electrical, I am such a :tardbang: I wonder if my uncle can weld something up for me. All I would need is some cast runners to bolt up to the head and a tube to weld them to with a port for the tb right?
Image
Wheel gap? Never heard of it.

User avatar
hp4lyfe
2GN Member
Posts: 139
Joined: Thu Apr 22, 2010 6:39 pm
Location: mesa,az

Post by hp4lyfe » Fri Jun 10, 2011 9:33 pm

why not go the home made ghetto blaster route?
Para todos todo, para nosotros nada

Official "I'm Going to Drive My Neon till it Dies" Club #114

racer12306
Junior Admin
Posts: 16015
Joined: Sun Oct 24, 2004 8:53 pm
Location: Baltimore, MD
Contact:

Post by racer12306 » Fri Jun 10, 2011 9:40 pm

heydockyle wrote:AMM has a dealer section on neons.org and is very backed up right now so he isn't taking any more orders.

He's slow at times but I don't think anyone has ever complained about his item's quality.
I don't doubt the quality at all. I've seen pictures and the welds look good, and on aluminum that's an art. It's just that I would probably never buy one from him solely due to the time he has taken.
-Frank
Member of Spork Racing
Forum issues: racer12306@2gn.org
Forum Behavior
Support your favorite forum, DONATE!

inthewerks
2GN Member
Posts: 58
Joined: Fri May 30, 2008 9:49 pm

Post by inthewerks » Fri Jun 10, 2011 11:23 pm

hp4lyfe wrote:why not go the home made ghetto blaster route?
What is that? My brother with the srt mentioned that to me but I have no idea what he is talking about. Basically, I want to add this http://www.modernperformance.com/crane- ... -2198.html either the #10 or #12, when I do my timing belt, water pump, and tensioner and want a better flowing head as eventually I will be going turbo with my sohc. Just trying to get the cheaper stuff out of the way first.
Image
Wheel gap? Never heard of it.


inthewerks
2GN Member
Posts: 58
Joined: Fri May 30, 2008 9:49 pm

Post by inthewerks » Sat Jun 11, 2011 10:10 am

Thanks. I wish I had a search button. All I see are letters and numbers and things like shift, caps lock.... :rofl: just joking man. Was very tired last night and just forgot all about searching. But I thank you for posting those links for me.
Image
Wheel gap? Never heard of it.

occasional demons
Junior Admin
Posts: 19357
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Sun Jun 12, 2011 12:30 am

It was more like a "Wow, I actually got some results" moment. Usually it takes some serious sifting. :lol:
Bill
dblsg wrote:ya'll a bunch of post whores
epic

2001 Neon ES MTX with '02 R/T PCM
Help support 2GN!

inthewerks
2GN Member
Posts: 58
Joined: Fri May 30, 2008 9:49 pm

Post by inthewerks » Sun Jun 12, 2011 8:25 am

Lol. I actually followed and read EVERY link you so gracefully posted for me :thumbup: , talked it over with my brother, and decided not to go that route. His primary concern was how well the plastic welds would hold up once I go boost. He recommended for me to get an r/t manifold, and not worry about hooking up the secondaries for now. Once the turbo is installed, to just remove the butterflies from the manifold altogether for a better boosted airflow. Does that sound about right? Head is not going to end up being ported although we did come to the conclusion that the crane #10 grind is worthless, and we are now pondering the 12 or 14 grind.
Image
Wheel gap? Never heard of it.

occasional demons
Junior Admin
Posts: 19357
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Sun Jun 12, 2011 9:36 am

Why remove the secondaries? Just prop the lever open, and be done. Not sure why everyone goes through more work than needed.

The plastic weld wouldn't be the weak link, it would be the runners/flange. The ABS tube will prolly handle more psi than the engine can handle. The main fear would be an intake backfire, But then those can damage more than an IM...
Bill
dblsg wrote:ya'll a bunch of post whores
epic

2001 Neon ES MTX with '02 R/T PCM
Help support 2GN!

inthewerks
2GN Member
Posts: 58
Joined: Fri May 30, 2008 9:49 pm

Post by inthewerks » Sun Jun 12, 2011 11:08 am

Thanks for your help occasional demons. This is why after a LONG leave of absence, I came back. Good people with excellent knowledge. :thumbup:
Image
Wheel gap? Never heard of it.

Post Reply

Return to “Engine”