help with cam

This is the place to ask questions about your engine components like cams, valves, pistons… just anything that is generally "engine" specific. This also includes questions about exhaust systems such as exhaust manifolds, piping size, mufflers, ect...
Post Reply
JasonS14
n00b
Posts: 18
Joined: Wed Jun 15, 2011 6:03 pm
Location: Daytona Beach, Fl

help with cam

Post by JasonS14 » Mon Jul 25, 2011 10:41 pm

So I plan on goin to the junkyard tomorrow and im goin to look for a single cam. Is there a certain socket size or a specific tool i need to take it out? Cuz i dont wanna make my trip there a waste. Thanks guys.
Image
'02 Neon MTX - DD/Project.

ZeroChad
2009 Gold Contributor
Posts: 3165
Joined: Sat Sep 01, 2007 11:08 pm
Location: Austin, Tx
Contact:

Post by ZeroChad » Tue Jul 26, 2011 12:41 am

You have to remove the torque struts, passenger engine mount plate and power steering. Then you'll be able to jack the engine up to take off the timing cover/belt and remove the cam gear so you can slide the cam out the driver's side. Before that you'll have to also take off the valve cover and unbolt the rockers.

All-in-all, more than one tool.
Old Neon Log | Feedback

2000 - Corvette Coupe
2002 - Neon SE Fully Built (scrapped)

Jerome Adams
2GN Member
Posts: 1038
Joined: Fri Nov 18, 2005 6:07 pm
Location: Bellevue, NE

Post by Jerome Adams » Tue Jul 26, 2011 12:44 am

go to the how to section and look up cam install...that will give you an idea what you are in for...

a full metric socket set, and torx (T55 I think), a jack and a friend who has done it before.

haynes manual will help too
Jerome

'03 SXT...DODGE NEON CONES

Official "I'm Going to Drive My Neon till it Dies" Club #067

User avatar
NEON PARABOLA
2GN Member
Posts: 1079
Joined: Wed Jul 09, 2008 11:07 pm
Location: Omaha,Nebraska

Post by NEON PARABOLA » Tue Jul 26, 2011 8:10 am

Beer is also usefull ;) good luck!
Image
-Sean
Official "I'm driving my neon till' it dies #28

BLK 03' NEON SXT 150,000 MILES

User avatar
sidepipe87
2009 Silver Contributor
Posts: 9491
Joined: Fri May 30, 2008 5:35 pm
Location: Pittsburgh, PA
Contact:

Post by sidepipe87 » Tue Jul 26, 2011 12:25 pm

it'd be easier to buy one from someone on here... no work and I guarantee you can find one dirt cheap if it's just an ordinary 2.0 cam
PM me for your 03+ PCM SKIM/VIN flashing needs. Neon PCMs Plus

sneakers O'toole
2GN Member
Posts: 871
Joined: Fri Jan 13, 2006 7:11 pm
Location: The grimey ass 610

Post by sneakers O'toole » Tue Jul 26, 2011 1:42 pm

<---- this guy has two just laying around..
Official "I'm Going to Drive My Neon till it Dies" Club #000004... or not..
Image

User avatar
XxWhiteNeonxX
2GN Member
Posts: 2110
Joined: Sat May 15, 2010 6:23 pm
Location: Pittsburgh, PA

Post by XxWhiteNeonxX » Tue Jul 26, 2011 2:10 pm

sneakers O'toole wrote:<---- this guy has two just laying around..
this guy has 3 :D
Image
Haganracing wrote: Love you Cody, even if you fail in life <3
Leighvi424 wrote:omg cody i think u gave me a woodie :P
2004 dodge neon-300whp and counting

racer12306
Junior Admin
Posts: 16015
Joined: Sun Oct 24, 2004 8:53 pm
Location: Baltimore, MD
Contact:

Post by racer12306 » Tue Jul 26, 2011 2:33 pm

And I've got a 95 cam just sitting in my basement soaking in oil.
-Frank
Member of Spork Racing
Forum issues: racer12306@2gn.org
Forum Behavior
Support your favorite forum, DONATE!

vntned
2GN Member
Posts: 213
Joined: Thu Nov 29, 2007 8:59 pm

Post by vntned » Tue Jul 26, 2011 2:50 pm

Ive got an '03 Magnum cam for sale! :P

Post Reply

Return to “Engine”