Page 1 of 2
Exhaust ?
Posted: Wed Sep 28, 2011 1:15 pm
by DodgeEvo
I was wondering if anybody here had an Flowmaster 80 series or super 44 on there neon that has the 2.0L engine in it, instead of the 2.4. Also if anybody has an video clip of it on the car being reved or driven. Thanks
Posted: Wed Sep 28, 2011 1:42 pm
by C1DoG
Sorry I can't help you there. I have a magnaflow camaro muffler on mine.
Posted: Wed Sep 28, 2011 1:43 pm
by Johny
C1DoG wrote:Sorry I can't help you there. I have a magnaflow camaro muffler on mine.
sorry to thread jack, but how much did that run you
Posted: Wed Sep 28, 2011 1:45 pm
by iThane
and i make a lot of threads??

Posted: Wed Sep 28, 2011 5:54 pm
by brybry
well.. i got an SRT-4 catback exhuast! works nice!
Posted: Wed Sep 28, 2011 8:10 pm
by DodgeEvo
I have that one right now and nobody on the cape will pass me for inspection sticker. Went to 4 to 6 places today, won't even do another reject.
Posted: Thu Sep 29, 2011 12:27 am
by brybry

thats lame
Posted: Thu Sep 29, 2011 3:24 am
by willjacks
heres a link to my old exhaust its a flowmaster 40 sounded pretty good but just got a dual pipe
http://www.youtube.com/watch?v=RVvPUUlR ... ideo_title
Posted: Thu Sep 29, 2011 7:42 am
by DodgeEvo
As long as it has some type of tone to it I guess. But I need to have an muffler around here.
Posted: Thu Sep 29, 2011 7:47 am
by C1DoG
Johny wrote:C1DoG wrote:Sorry I can't help you there. I have a magnaflow camaro muffler on mine.
sorry to thread jack, but how much did that run you
I got it off of E-bay for 105 after it was all done. That was for muffler alone.
Posted: Thu Sep 29, 2011 8:24 am
by DodgeEvo
I am thinking about seeing if I can put the muffler in the middle of the car so I can keep my srt 4 rear.
Posted: Thu Sep 29, 2011 8:26 am
by C1DoG
Be interesting to see if that can be done.
Posted: Thu Sep 29, 2011 8:39 am
by DodgeEvo
Actually no it can't, unless you let it hang. Remebering when I was doing the glasspack it wasn't easy, so am just going to do an single exit I guess.
exhaust?
Posted: Thu Sep 29, 2011 10:51 am
by g_force58
I have the camaro magnaflow on mine and love it. Just enough growl to say it isn't stock and yet not sound like a fart cannon.
Re: exhaust?
Posted: Thu Sep 29, 2011 11:00 am
by occasional demons
g_force58 wrote:I have the camaro magnaflow on mine and love it. Just enough growl to say it isn't stock and yet not sound like a fart cannon.
This.
Tho if I had my camera yesterday, I would have had pics of the ultimate in exhausts!
A Cavalier, with dual 5" chrome stacks through the deck lid, with the factory spoiler cut out to accommodate them.
It still sounded like a ricer.
Plus it had a huge receiver bolted on, complete with hitch balls for towing, maybe a lawn mower?
Edit: Yes the stacks were functional, or dysfunktional whichever way you want to see it.
Re: exhaust?
Posted: Thu Sep 29, 2011 11:03 am
by C1DoG
occasional demons wrote:g_force58 wrote:I have the camaro magnaflow on mine and love it. Just enough growl to say it isn't stock and yet not sound like a fart cannon.
This.
Tho if I had my camera yesterday, I would have had pics of the ultimate in exhausts!
A Cavalier, with dual 5" chrome stacks through the deck lid, with the factory spoiler cut out to accommodate them.
It still sounded like a ricer.
Plus it had a huge receiver bolted on, complete with hitch balls for towing, maybe a lawn mower?
Seems to me the camaro muffler is the way to go if you don't want to sound farty.
As to the Cavalier driver.

Posted: Thu Sep 29, 2011 11:09 am
by occasional demons
It was hilarious. The guy acted like he was the shit, which made it even funnier. Dude was tailgating traffic in front of him, and giving it hell as much as possible. I could see him watching me in his mirror. I think he crapped when I goosed it, and slid sideways at 45 mph. (It was wet) About all he could do is make more noise.
Ahh, cheap entertainment....
Posted: Thu Sep 29, 2011 12:11 pm
by C1DoG
Posted: Thu Sep 29, 2011 12:17 pm
by cgneon
camaro muffler is a popular option, flowmasters equivelant as well. i recommend the flowmaster "delta flow" line, its same sound as the regular ones, but less drone/cabin noise.. loud outside, quiet inside. love mine..
Posted: Thu Sep 29, 2011 2:40 pm
by DodgeEvo
Anybody have the part number for the mangaflow muffler and any picks. BTW I need a cat also. Went to do the work and the cat basic just droped(I know it was going) when I disconnected the pipe. Here is the story. I could get an inspection sticker yesterday cuz everbody was saying it was to loud and you need to have a muffler on it. Well I ways had exhaust system were it had the glasspack and can on the end. Well my mom was like its because your young and I will take it and get one. Well she went and the guy said its all illegal, wont pass. He said that I could make it alittle quiter than he would pass it. Here is the thing about the cat, he finished it off after revving the car about 3 to 4 times in the garage probly. I told my mom that he was lieing and now I have to get an new cat. He played the story about me trying to make it quiter and then he will pass it knowing that as soon as I disconnected the pipe the cat would drop and have to be replaced. Basicly hopping that I cant do the work on my car and he would be able to do it. So he would be getting paid to do new cat, and full exhaust. I am pissed.
Posted: Thu Sep 29, 2011 3:03 pm
by occasional demons
If all it took was revving to finish off the cat, it was going to be done at the first pothole you hit anyways.
Just get a direct fit cat, and build your exhaust from there. You won't need any welding, special equipment etc.
You can't prove a thing against him, so it is what it is. Fix it yourself, and move on...

Posted: Thu Sep 29, 2011 3:10 pm
by DodgeEvo
Ya I guess your right, just pissed because you put the time into it and its like if it comes around and bites you in the ass every once in awhile. I have pacesetter headers, so would and oem replacement from mangaflow work by any chance.
Posted: Thu Sep 29, 2011 11:07 pm
by occasional demons
Is the header flange 4 bolt or the 1gn style two bolt, with the springs and donut gasket?
The 4 bolt will direct fit will work with the Magnaflow, or any direct fit '00 and up cat.
The magnaflow direct fit isn't any better than the others tho.
Posted: Fri Sep 30, 2011 6:55 am
by DodgeEvo
I have an two bolt system.
Posted: Fri Sep 30, 2011 7:39 am
by DodgeEvo
Looked around online and found this video clip of an chevy camaro muffler on an SXT. I was wondering if this is close to what some of you have.
http://www.youtube.com/watch?v=4ynZvSAFYpw&NR=1
Posted: Fri Sep 30, 2011 7:46 am
by occasional demons
DodgeEvo wrote:I have an two bolt system.
Then you will have to have a universal cat welded to a two bolt flange to make it work. But the plus to this, is you can use a cat with a better matched inlet to the header outlet.
Or possibly a 1gn cat may work with a 2gn midpipe?
Posted: Fri Sep 30, 2011 8:28 am
by C1DoG
It's close to what mine sounds like.
Posted: Fri Sep 30, 2011 8:52 am
by racer12306
DodgeEvo wrote:Anybody have the part number for the mangaflow muffler and any picks. BTW I need a cat also. Went to do the work and the cat basic just droped(I know it was going) when I disconnected the pipe. Here is the story. I could get an inspection sticker yesterday cuz everbody was saying it was to loud and you need to have a muffler on it. Well I ways had exhaust system were it had the glasspack and can on the end. Well my mom was like its because your young and I will take it and get one. Well she went and the guy said its all illegal, wont pass. He said that I could make it alittle quiter than he would pass it. Here is the thing about the cat, he finished it off after revving the car about 3 to 4 times in the garage probly. I told my mom that he was lieing and now I have to get an new cat. He played the story about me trying to make it quiter and then he will pass it knowing that as soon as I disconnected the pipe the cat would drop and have to be replaced. Basicly hopping that I cant do the work on my car and he would be able to do it. So he would be getting paid to do new cat, and full exhaust. I am pissed.
Do what?
Posted: Fri Sep 30, 2011 9:09 am
by C1DoG
12265 Magnaflow Muffler Camaro Trans AM V8 2.5"
Posted: Fri Sep 30, 2011 10:47 am
by DodgeEvo
Thanks C1Dog and if thats what it sounds like, I like it.