Page 1 of 1
cruise control servo vacuum line snapped
Posted: Thu Nov 10, 2011 8:25 pm
by nineball
already throwing a cel and it will be fixed this weekend, but is it ok to still drive the car with it snapped?
Posted: Thu Nov 10, 2011 9:39 pm
by ZeroChad
Go ahead and tape the end to plug it so you don't have a vacuum leak and high idle. You should be fine until its fixed.
Posted: Thu Nov 10, 2011 10:37 pm
by nineball
thanks.
Posted: Sat Nov 12, 2011 9:39 am
by nineball
$18 for a new line from the dealer, should be here by next friday.
Posted: Sat Nov 12, 2011 6:44 pm
by r/tguy02
i did the same thing before, just went to the jy and got a couple new pieces.
Posted: Sat Nov 12, 2011 7:39 pm
by nineball
r/tguy02 wrote:i did the same thing before, just went to the jy and got a couple new pieces.
for $18 i don't care about buying new, but i do have a question for you. do the lines just pull out from the T junction or are they somehow sealed/glued into it? what i am getting at is i would love to just pull the small line i need out of the new piece and replace the broken one in the car instead of replacing the entire assembly.
Posted: Sun Nov 13, 2011 7:43 pm
by r/tguy02
yes it all just pulls apart, just be careful as those lines are brittle. actually if you delete the vacuum reservoir youll have enough leftover pieces to probably fix your problem