Page 1 of 1
CAR DIES when you press in the clutch!!!
Posted: Sat Jun 30, 2012 1:29 pm
by donnie93
i recently rebuilt my car and everything was going good until i got in to drive it this morning and i noticed the speedo wasnt working then i came up on a stop sign and engaged the clutch and what do y a kno she dies.. now everytime i come up on a stop sign my car dies with the clutch in.. anyone heard of this???
Posted: Sat Jun 30, 2012 1:54 pm
by occasional demons
Well first thing is to figure out why the speedo isn't working.
Plus put your year/engine (could be swapped) and transaxle in your sig. Makes it easier to see what you have for future posts, and you don't have to explain every time.
Obviously from your post you do have an MTX.
The IAC keeps the engine idling at/near 1000 rpm while in motion, it does vary with speed. But since you have no speed input, the PCM does not know it is in motion, and is not kicking up the RPM. While it should not stall when the clutch is pushed, it might be part of the issue. It should idle between 600 to 800, with 750 to 800 being the spec. But these things rarely idle where they should.
For some reason, my guess is the IAC motor is either sticking, or just not working.
Depending on your year, depends on what type of IAC you have.
Posted: Sat Jun 30, 2012 1:56 pm
by donnie93
yea forgot to add that its a 2003 r/t. has comp cam bored.20over if that adds anything