Page 1 of 1


Posted: Thu Oct 25, 2012 8:01 pm
by cutsheal5
Anyone running one in a 2002 neon and knows where to get a correct wiring diagram for it? and are you using tha tach adapter or not i have read multipul posts saying its not needed.

Hows it working for you?

Posted: Thu Oct 25, 2012 8:52 pm
by 7654800neon
i had a neo and you need the tach driver or it wont work i have one for sale if you need one

this is the one i used for my 2000 and it work fine

Posted: Fri Oct 26, 2012 1:35 pm
by ragek23
I have the one Alex had in his 2001 neon. as with yours he also used the tach adapter.

Posted: Wed Oct 31, 2012 3:54 pm
by chew*
Using same diagram for mine with 02 R/T harness.

Works fine.

Without tach adapter tuning is limited on safcII to throttle position, no clue about neo.

I'll go out on a limb and say tach adapter helps fine tuning since you can also tune by rpm and not just throttle position........but it will work since the tuning is roughly 60-70% TP biased and 30-40% rpm........As you have already read.

I'd suggest an accurate wideband and a "new" 02 not someones used wideband 02. There is enough tuning available with one to kill an engine rather quickly.

Sidenote avoid 5 in 5 out setting. Use 4 in 4 out or 6 in 6 out.

Posted: Wed Nov 14, 2012 12:07 pm
by el-fit
I`m running w/o tach adapter and i tune by rpm.

10psi stock timming stock ecu.

10.9 - 10.7 a/f all the way