Page 1 of 1

Exhaust info needed

Posted: Wed Nov 26, 2014 3:17 pm
by 3L3K7R0N1X
Anybody know anything about this exhaust?
http://www.protuninglab.com/cbe-dn00-so-20l.html

Posted: Wed Nov 26, 2014 3:20 pm
by gtxtreme19
for the price its stainless, if you even replace the rear section with something higher quality or better sounding you still haven't spent too much money

Posted: Wed Nov 26, 2014 3:26 pm
by 3L3K7R0N1X
The only problem i see with it is that big ass ricer tip, but it does come with a silencer

Posted: Fri Nov 28, 2014 7:35 am
by NickKo
Does your car come with a factory rear sway bar ??

Some folks have said they've had issues with fitment, on Neons with the rear sway bar -- Depending upon the 'kit' (or brand) that was used.
If you don't have a rear sway bar to interfere with fitment -- Then you don't have to worry about that.




Dynomax used to offer an excellent 2.5 exhaust for the Neons which cleared the rear sway bar, no problems.... But it has been discontinued. :( I don't know if any of the other kits can claim the same.


- Nick

Posted: Fri Nov 28, 2014 9:40 am
by INVUJerry
You can find that cheaper on ebay.

Posted: Tue Dec 02, 2014 10:06 am
by 3L3K7R0N1X
I didnt ask how cheap i can find it, i asked if it was even worth considering over stock exhaust

Posted: Wed Jan 14, 2015 2:22 pm
by MustardTiger250
I bought the same exhaust, I had no fitment issues. The only problem is that the tip is absurdly big so i cut it off and welded a 3" rolled tip to make it look more discreet. it sounds really good compared to most of the exhaust clips you hear on youtube, especially with a short ram intake. At 4k it gets loud, like your car has vtec. no noticeable performance increase though

Posted: Sun Jan 25, 2015 2:43 pm
by NickKo
MustardTiger250 wrote:I bought the same exhaust, I had no fitment issues. The only problem is that the tip is absurdly big so i cut it off and welded a 3" rolled tip to make it look more discreet. it sounds really good compared to most of the exhaust clips you hear on youtube, especially with a short ram intake. At 4k it gets loud, like your car has vtec. no noticeable performance increase though
Good to know.
Thanks for the review !! 8)

Question:
Does your car, have the rear sway bar ?? :-k


- Nick

Posted: Sun Feb 08, 2015 11:57 pm
by 3L3K7R0N1X
Sorry for the late response, no net. Will the stock tip mount up right on the body cutout or will i have to modify it? And im honestly not sure about the sway bar, ill have to look at it

Posted: Fri Feb 13, 2015 10:36 pm
by NickKo
3L3K7R0N1X wrote:Sorry for the late response, no net. Will the stock tip mount up right on the body cutout or will i have to modify it? And im honestly not sure about the sway bar, ill have to look at it
I wouldn't be surprised, if you had to modify it.

If you install the exhaust yourself.... That could give you a bit of flexibility, with how you mount the muffler to match the cutout.


- Nick

Posted: Sat Feb 21, 2015 11:55 am
by 3L3K7R0N1X
Well i also thought about just cutting the tip to keep a stock look too