Trannys to use?

Questions about axles, transmissions, differentials, pretty much anything that connects the engine to the wheels, this is the place for those questions.
Post Reply
DoubtedNeon
2GN Member
Posts: 1483
Joined: Mon Jun 16, 2008 5:28 pm
Location: Larsen, Wisconsin, 54947

Trannys to use?

Post by DoubtedNeon » Sat Jul 05, 2008 1:29 pm

i have a 04 sxt looking for a manual tranny, did dodge make any other trannys that will work with a 04 neon on any other cars?
Image
Swordfish2Cowboy wrote:They left a pry bar? Well get the prints like they do on CSI, and track those fuckers down. Then cap them.
grindpunk16 wrote: You and about 2 dozen other folks want that cover. It came with the car, and it's all mine.. :twisted: :bootyshake: \:D/
Top
User avatar
INVUJerry
2GN Veteran
Posts: 6604
Joined: Mon Nov 21, 2005 9:55 pm
Location: Hanover, PA
Contact:
Contact INVUJerry

Post by INVUJerry » Sat Jul 05, 2008 2:00 pm

The PT cruisers transmission will work.
Image
So many neons so little time.
Top
Donkeypuncher
2GN Member
Posts: 2183
Joined: Wed Mar 12, 2008 6:14 am
Location: Dallas, Tx

Post by Donkeypuncher » Sat Jul 05, 2008 2:43 pm

These all use the NVT350 hydraulic clutch bellhousings:
The 95-00 avenger/sebring (3.94 only)
95-99 eclipse/talon (3.94 only)
2001+ neons
2001+ n/t pt cruiser

The 95-99 neon used a cable setup, so you would have to swap bellhousings. The chart shows these having a torque capacity at 135 ft./lbs., and the 01+ at 165 ft./lbs., so I would stick with the 01+. http://www.neons.org/forumdodge/trans.htm
Top
Post Reply

Return to “Drivetrain”