srt-4 sifter cable
srt-4 sifter cable
Will the srt-4 shifter cable fit my 00 neon? As I was taking out my old cables one them broke at the end where the bushing goes. I seen some srt-4 used cables on ebay and Im wondering if it will fit my car. It looks like its the same lenght.
-
BlackRoseRacing
- 2009 Platinum Contributor
- Posts: 12729
- Joined: Sat Dec 25, 2004 8:58 am
which end did it break?
it's common for the end to break off at the shifter and you can always replace it like so:
^^^
plastic end at the shifter
^^^ Kyle's rod ends....
^^^
Broken rod end, and the new end I picked up for $3.70 from a local racing supply shop....
^^^
My shifter cable end threaded for the rod end to screw on...
^^^
Rod end installed....
it's common for the end to break off at the shifter and you can always replace it like so:
^^^
plastic end at the shifter
^^^ Kyle's rod ends....
^^^
Broken rod end, and the new end I picked up for $3.70 from a local racing supply shop....
^^^
My shifter cable end threaded for the rod end to screw on...
^^^
Rod end installed....