T350HD
- NGCnoproblem
- 2GN Member
- Posts: 866
- Joined: Wed May 09, 2012 1:32 am
- Location: Buckley, WA
-
- n00b
- Posts: 7
- Joined: Mon Feb 10, 2014 12:21 pm
What would be a good built up and modified T-350HD max torque capacity estimate? I read some where that the stock unit was rated at 165 ft/lbs. I am curious because of my Neon TDI conversion project I am doing as the stock TDI I have is rated at 144 ft/lbs. With very minimal modification this TDI will do 200 ft/lbs at 2000rpm. So I am going to have to customize the Neon transmission if possible or use a TDI gearbox.
Any experienced input would be greatly appreciated.
Thanks,
GP
Any experienced input would be greatly appreciated.
Thanks,
GP
-
- Junior Admin
- Posts: 20306
- Joined: Thu May 03, 2007 12:14 pm
- Location: Ashland Ohio
Going from post #3, if it can handle up to 500 hp, I 'm sure something that makes 500 horses, is putting down over 200 ft lbs for a good percentage of that 500 hp.
You will be, like a boosted engine, putting more load on the higher gears than a N/A 2.0. But some common sense generally helps out there.
I'm sure Chipdogg can build you an MTX that will fill your needs.
You will be, like a boosted engine, putting more load on the higher gears than a N/A 2.0. But some common sense generally helps out there.
I'm sure Chipdogg can build you an MTX that will fill your needs.
Bill
1999 neon coupe 2.4 swap
2021 Forester
2000 Neon MTX swap with '02 R/T PCMOlha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
1999 neon coupe 2.4 swap
2021 Forester