04 SRT Transmisson shifting issues !? HELP

Questions about axles, transmissions, differentials, pretty much anything that connects the engine to the wheels, this is the place for those questions.
Post Reply
kicker469
2GN Member
Posts: 27
Joined: Wed Feb 17, 2010 11:00 am
Location: Fredonia NY

04 SRT Transmisson shifting issues !? HELP

Post by kicker469 » Tue Jun 11, 2013 8:24 pm

I have an 04 srt-4 and sometimes I can not get my car to shift into first gear or reverse, and other times it will shift but it is extremely hard to get into gear . Help

User avatar
JeffM
2GN Member
Posts: 3588
Joined: Tue Nov 04, 2008 8:02 pm
Location: Vermont

Post by JeffM » Tue Jun 11, 2013 8:38 pm

Gonna need some more info. Miles, shifter, booger bushings?, etc.

Most likely the clutch fork/clutch/pivot ball at the end of its life. In the meantime you can adjust the clutch pedal pivot all the way out to gain some extra throw in the pedal, but you will eventually have to drop the trans.
Image

kicker469
2GN Member
Posts: 27
Joined: Wed Feb 17, 2010 11:00 am
Location: Fredonia NY

Post by kicker469 » Sun Jun 23, 2013 8:51 pm

sorry for the long wait on reply been busy. I have roughly 140,000 miles stock shifter and yes i have booger bushings. thanks any info

jrumann59
2009 Platinum Contributor
Posts: 639
Joined: Sun Jul 09, 2006 7:47 pm
Location: Edgewood, MD

Post by jrumann59 » Wed Jun 26, 2013 3:26 pm

Only going into first or reverse? My f1st gen did that then the clutch died.
bone-yard-racing wrote:
Remind him of two things for the mustang:
Slow in=Fast out
Fast in=Ambulance out
ImageImage

Silver05SRT4
n00b
Posts: 6
Joined: Sat Sep 14, 2013 1:32 pm
Location: clearwater , FL

Post by Silver05SRT4 » Sat Sep 14, 2013 1:49 pm

i had the same issue except 5th and reverse went out , basically it was the forks , clutch etc.. and had to have the transmission rebuilt.

NickKo
2009 Gold Contributor
Posts: 2248
Joined: Sun Jun 11, 2006 11:24 am
Location: IL./WI.border

Post by NickKo » Sat Sep 14, 2013 3:20 pm

Before condemning the clutch or transmission..... Check and make sure that the shifter bushings are O.K. ....at the shifter itself.

I have Boogers on all the Neons in the driveway, but only at the transmission end - I prefer to leave the 'stock' bushings on a Maddog shifter.

One day while driving to work, one of my 15-year old factory bushings disintigrated, leaving me stranded until I 'MacGuyver'ed" a temporary fix, to get myself home and do a proper repair.



http://farm3.staticflickr.com/2823/9368 ... f022_z.jpg
Image



- Nick
Last edited by NickKo on Sun Sep 15, 2013 7:20 pm, edited 1 time in total.
-1998 2-dr SOHC MTX= 57mm TB; Maddog STS
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm

Official "I'm Going to Drive My Neon till it Dies" Club #000009

User avatar
iThane
2GN Member
Posts: 1251
Joined: Thu Sep 30, 2010 5:33 pm
Location: Las Vegas, NV

Post by iThane » Sat Sep 14, 2013 11:56 pm

I've had a similar issue, since the day I bought the car two years ago in fact. It happens mostly with reverse. This was before and after installing my STS. I wanna say my first gear occasionally does the same thing.. It occurs maybe once a month so I forget about it till it happens again. For what it's worth, some times it kinda feels like my transmission rocks back and forth when I change gears.. Maybe tranny mounts?
Image
My Progress Log
Official "I'm Going to Drive My Neon till it Dies" Club #000104

User avatar
g_force58
2GN Member
Posts: 362
Joined: Mon Dec 07, 2009 9:27 pm
Location: Loudon, TN

srt shifter problems

Post by g_force58 » Sun Sep 15, 2013 4:00 pm

This happened with my 2000ES when I went to a STS. Still hard to get into reverse.
To Conquer or to Die

User avatar
Arro
2GN Member
Posts: 1933
Joined: Wed Apr 25, 2007 12:14 pm
Location: Temecula, California (951)

Post by Arro » Fri Oct 11, 2013 11:21 pm

Some of it is probably due to the transmission twisting back and forth under hard shifting, because it repositions the shifter cables. Solid mounts (or inserts) would eliminate a lot of that.... buuuuut... that worn shift fork issue also contributes to proper engagement of the clutch, so..... try mounts and bushings first. Failing that, it's time to pull the trans and replace that fork.
Drive it like you stole it, and work on it like you married it.
- A - R - R - O - 2000 - NEON SE - // - 2003 - SRT-4 -
Cardomain: http://www.cardomain.com/ride/2651950
Image
Official "I'm Going to Drive My Neon till it Dies" Club #22

Post Reply

Return to “Drivetrain”