Estimate transmission replace cost?
-
- 2GN Member
- Posts: 27
- Joined: Fri Apr 18, 2014 2:47 pm
Estimate transmission replace cost?
I just bought an 02 Neon R/T, Sold to me because the previou owner did not take care of it, and the transmission is griding in 2nd and 4th, and will not catch at all in 3rd( I think its synchros as well). Im worndering first of all are there ant miricle fluids to put in there?
If not how much does a transmission replace usually run for an 02 neon 5 speed? Im not picky and ill take the cheaper more common transmission. I just need some insight.
If not how much does a transmission replace usually run for an 02 neon 5 speed? Im not picky and ill take the cheaper more common transmission. I just need some insight.
-
- Junior Admin
- Posts: 20306
- Joined: Thu May 03, 2007 12:14 pm
- Location: Ashland Ohio
'01 PT Cruiser is the same as what you have. '02 PT is the same FD, but the 5th gear is better suited for highway use.
'03 to '05 neons may have a bit too tall of a 5th for your liking. Unless you do a 2.4 swap, then It is actually pretty nice...
http://www.neons.org/forumdodge/trans.htm
'03 to '05 neons may have a bit too tall of a 5th for your liking. Unless you do a 2.4 swap, then It is actually pretty nice...
http://www.neons.org/forumdodge/trans.htm
Bill
1999 neon coupe 2.4 swap
2021 Forester
2000 Neon MTX swap with '02 R/T PCMOlha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
1999 neon coupe 2.4 swap
2021 Forester
-
- 2GN Member
- Posts: 27
- Joined: Fri Apr 18, 2014 2:47 pm
-
- 2GN Member
- Posts: 27
- Joined: Fri Apr 18, 2014 2:47 pm
You can.
Do you have a hydraulic press, at least 20 ton?
Do you have a variety of snap ring pliers? Snap rings with holes in the end and snap rings with just a tapered end.
Do you have feeler gauges?
Here's what is involved in changing synchros:
The black fixture everything is held on is anywhere from $120 used to $400 new. I wouldn't wanna take one apart without it.
And here's what they look like when I'm done with them:
Do you have a hydraulic press, at least 20 ton?
Do you have a variety of snap ring pliers? Snap rings with holes in the end and snap rings with just a tapered end.
Do you have feeler gauges?
Here's what is involved in changing synchros:
The black fixture everything is held on is anywhere from $120 used to $400 new. I wouldn't wanna take one apart without it.
And here's what they look like when I'm done with them:
-
- 2GN Member
- Posts: 27
- Joined: Fri Apr 18, 2014 2:47 pm
if they can do it at all given the lack of parts available anymore. chip has a lot of parts hoarded so he is able to do them.
Justin
[02 R/T sold][00 Highline sold][04 r/t scrapped][95 NYG Sport coupe][01 r/t DD]
http://www.cardomain.com/ride/2931823
[02 R/T sold][00 Highline sold][04 r/t scrapped][95 NYG Sport coupe][01 r/t DD]
http://www.cardomain.com/ride/2931823
Yup, I have at least 20 cores. Plus I currently have enough NIB seals, bearings, diff pins and saver tabs in stock to do 5 transmissions. More if I had more of the damn input shaft seal/bearing/TOB snouts!r/tguy02 wrote:if they can do it at all given the lack of parts available anymore. chip has a lot of parts hoarded so he is able to do them.