Help with electrical.
-
- 2GN Member
- Posts: 38
- Joined: Wed Dec 11, 2013 1:27 pm
- Location: 530 California
Help with electrical.
I posted before but still have trouble. I have no reverse lights. The bulbs are good the fuses are good and I rewired the trans range sensor. I have no idea what to do next. Any help? The only thing I could think of would be replacing the Trans range sensor. Don't you have to drop the pan for that?
Have you checked the wiring at the connector itself ?? I have seen broken wiring causing these kinds of issues.
Is yours a ATX or MTX ??
- Nick
Is yours a ATX or MTX ??
- Nick
-1998 2-dr SOHC MTX= 57mm TB; Maddog STS
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm
Official "I'm Going to Drive My Neon till it Dies" Club #000009
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm
Official "I'm Going to Drive My Neon till it Dies" Club #000009
-
- 2GN Member
- Posts: 38
- Joined: Wed Dec 11, 2013 1:27 pm
- Location: 530 California
-
- Junior Admin
- Posts: 20306
- Joined: Thu May 03, 2007 12:14 pm
- Location: Ashland Ohio
Have you tried bypassing the sensor by jumping the socket to see if the reverse lights work? Might save you from buying a range sensor, but still leave you searching.
Bill
1999 neon coupe 2.4 swap
2021 Forester
2000 Neon MTX swap with '02 R/T PCMOlha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
1999 neon coupe 2.4 swap
2021 Forester
-
- 2GN Member
- Posts: 38
- Joined: Wed Dec 11, 2013 1:27 pm
- Location: 530 California