SRT-D
- liconhomeie
- n00b
- Posts: 13
- Joined: Sun Aug 31, 2014 5:21 pm
SRT-D
while i wait for my shop to get back to me on a quote for my custom exhaust set up, i wanted to put a short throw shifter on my '05 SRT-D. i was wondering if the SRT-4 short throw kits will work on my SRT-D? i can tend to find them ALOT cheaper then i can find one listed for a regular neon SXT. especially on EBAY.
[img]
- sidepipe87
- 2009 Silver Contributor
- Posts: 9516
- Joined: Fri May 30, 2008 5:35 pm
- Location: Pittsburgh, PA
- Contact:
rod brakes, not breaks. like brakes on a car
PM me for your 00+ PCM SKIM/VIN flashing needs. Neon PCMs Plus
- liconhomeie
- n00b
- Posts: 13
- Joined: Sun Aug 31, 2014 5:21 pm
- sidepipe87
- 2009 Silver Contributor
- Posts: 9516
- Joined: Fri May 30, 2008 5:35 pm
- Location: Pittsburgh, PA
- Contact:
you weren't incorrect thinking that Adam!
Yes, the Hurst STS will fit in a non SRT neon. All 2gn shifters are interchangeable.
Yes, the Hurst STS will fit in a non SRT neon. All 2gn shifters are interchangeable.
PM me for your 00+ PCM SKIM/VIN flashing needs. Neon PCMs Plus
Think about getting the 'Maddog' - It is without a doubt, the best short-throw shifter out there - And pricing is not too bad, either.
http://www.maddogsts.com/
I own two of his shifters.
- Nick
http://www.maddogsts.com/
I own two of his shifters.
- Nick
-1998 2-dr SOHC MTX= 57mm TB; Maddog STS
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm
Official "I'm Going to Drive My Neon till it Dies" Club #000009
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm
Official "I'm Going to Drive My Neon till it Dies" Club #000009
- liconhomeie
- n00b
- Posts: 13
- Joined: Sun Aug 31, 2014 5:21 pm
well, i got the hurts STS installed. it was a nice improvement. and im glad i didnt go for something smaller from maddog because the shift pattern is already pretty small with the hurst shifter and my mom drives my car every now and then and she was already missing gears!! lol. thank god for rod breaks.lol
[img]
Glad you are happy with it !!liconhomeie wrote:well, i got the hurts STS installed. it was a nice improvement. and im glad i didnt go for something smaller from maddog because the shift pattern is already pretty small with the hurst shifter and my mom drives my car every now and then and she was already missing gears!! lol. thank god for rod breaks.lol
- Nick
-1998 2-dr SOHC MTX= 57mm TB; Maddog STS
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm
Official "I'm Going to Drive My Neon till it Dies" Club #000009
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm
Official "I'm Going to Drive My Neon till it Dies" Club #000009