Page 1 of 1
Finding spark plugs
Posted: Mon Jul 13, 2009 6:10 pm
by Broken Glass
Hey can anyone help me find spark plugs 1 step colder than oem? None of the local part stores have been helpful thanks
Posted: Mon Jul 13, 2009 6:21 pm
by Adionik
NGK: LZTR6AIX-13 iridium 1 step colder
NGK: LZTR7AIX-13 iridium 2 step colder
I am not sure if these plugs work on 2.0 heads or what...
Posted: Mon Jul 13, 2009 6:31 pm
by Broken Glass
Thanks, if anyone can let me know if these will work on my head please chime in
Posted: Mon Jul 13, 2009 7:52 pm
by esteinmaier
BKR7E (Or a variation of) for copper plugs.
Posted: Mon Jul 13, 2009 8:09 pm
by occasional demons
2.4 DOHC
14mm Thread, 25.4mm (1") Reach, 5/8" (16mm) Hex Size, Tapered Seat,
2.0 SOHC
14mm Thread, 19mm (3/4") Reach, 5/8" (16mm) Hex Size, Gasket Seat,
I would say no go on compatibility.
Posted: Tue Jul 14, 2009 6:34 am
by Broken Glass
grrr does anyone know of ones that will work on the sohc head then?
Posted: Tue Jul 14, 2009 8:10 am
by dtjackten
esteinmaier wrote:BKR7E (Or a variation of) for copper plugs.
there is ur answer, run them every day!
Posted: Tue Jul 14, 2009 9:49 am
by occasional demons
You can go to NGK or any other manufacturer's web site and the have the drop boxes to find you application, and what's available.
Just put NGK, Champion, etc in the search engine and you will find the web sites. Champion is where I got those specs.
Posted: Tue Jul 14, 2009 4:14 pm
by Cbussilver01es
Go over to Modern Performance, and check out their selection over there. I actually just purchased some NGK's from over there.
Good Luck
Posted: Wed Jul 15, 2009 3:32 am
by Adionik
occasional demons wrote:2.4 DOHC
14mm Thread, 25.4mm (1") Reach, 5/8" (16mm) Hex Size, Tapered Seat,
2.0 SOHC
14mm Thread, 19mm (3/4") Reach, 5/8" (16mm) Hex Size, Gasket Seat,
I would say no go on compatibility.
Yeah, saw the difference today when I pulled out plugs in my SXT.
No go on SRT plugs