non srt 2.4

Have a question related to Turbos, Nitrous, Supercharging, ect... ask it here.
Post Reply
2001rt32
2GN Member
Posts: 410
Joined: Sat Dec 15, 2007 2:20 pm

non srt 2.4

Post by 2001rt32 » Mon Sep 21, 2009 6:53 am

ok i dont know if this should be here but it seemed logical... i have a chance to get a 96 2 door coupe 2.4 swap from a 96 stratus. my question is could i turbo that motor with an srt turbo, use an srt computer and sensors with low boost or would it be better to just pull that motor and put an srt setup in?

Jenni
2GN Member
Posts: 2499
Joined: Tue Aug 23, 2005 1:33 pm
Location: Berlin, Germany

Post by Jenni » Mon Sep 21, 2009 7:35 am

the motor has the same size but is different. you cannot just boost it 1:1 with srt parts.

racer12306
Junior Admin
Posts: 16015
Joined: Sun Oct 24, 2004 8:53 pm
Location: Baltimore, MD
Contact:

Post by racer12306 » Mon Sep 21, 2009 7:52 am

Your best bet is to get a set of SRT rods and pistons. If you check out JonnyMopar's progress log you will see what you need. His was in a Daytona but the engine won't be different.
-Frank
Member of Spork Racing
Forum issues: racer12306@2gn.org
Forum Behavior
Support your favorite forum, DONATE!

DoubtedNeon
2GN Member
Posts: 1483
Joined: Mon Jun 16, 2008 5:28 pm
Location: Larsen, Wisconsin, 54947

Post by DoubtedNeon » Mon Sep 21, 2009 2:52 pm

ya, or chris' show car dark jewel is the same thing i think, its like 3 different motors maybe ask him, hul kogan i think
Image
Swordfish2Cowboy wrote:They left a pry bar? Well get the prints like they do on CSI, and track those fuckers down. Then cap them.
grindpunk16 wrote: You and about 2 dozen other folks want that cover. It came with the car, and it's all mine.. :twisted: :bootyshake: \:D/

Post Reply

Return to “Forced Induction”