bov's
-
- 2GN Member
- Posts: 2759
- Joined: Mon May 28, 2007 6:06 am
- Location: reno/cali
- Contact:
bov's
I have a turbo kit that i am trying to put on my car and the coldside pipe has an evo8 style bov flange on it.
It looks to be about an inch and a half diameter for a bov that clamps on with a hose clamp.
does anybody know of any good brand bov's that will work for me? thay don't have to be a recirc as it's going on a neon with a map sensor.
I was thinking something like the stock evo9mr metal bov or tomei brand. any input guys?
any input on these?....
thinking about an adapter plate like this
http://www.maperformance.com/atp-turbo- ... o-8-9.html
and an ebay hks ss
or this adapter
http://www.maperformance.com/atp-turbo- ... o-8-9.html
and a 2g dsm bov or a greddy type s
or the evo9 stock bov (sposed to be good to 25psi and not leak like the plastic evo 8 junk)
It looks to be about an inch and a half diameter for a bov that clamps on with a hose clamp.
does anybody know of any good brand bov's that will work for me? thay don't have to be a recirc as it's going on a neon with a map sensor.
I was thinking something like the stock evo9mr metal bov or tomei brand. any input guys?
any input on these?....
thinking about an adapter plate like this
http://www.maperformance.com/atp-turbo- ... o-8-9.html
and an ebay hks ss
or this adapter
http://www.maperformance.com/atp-turbo- ... o-8-9.html
and a 2g dsm bov or a greddy type s
or the evo9 stock bov (sposed to be good to 25psi and not leak like the plastic evo 8 junk)
[/quote]Yup it definately needs to go lower. If its not scrapeing constantly why you are driving then its not low enough bro. [/quote]
-
- 2GN Member
- Posts: 2759
- Joined: Mon May 28, 2007 6:06 am
- Location: reno/cali
- Contact:
http://www.maperformance.com/atp-turbo- ... o-8-9.html
http://www.maperformance.com/atp-turbo- ... o-8-9.html
hope these work.
basically the hahn kit uses an evo 8 style bov.
the bov attaches onto the piping with a small hose and hose clamps.
the adapters clamp on the piping and have a flange for either an hks or greddy bov
if i use the greddy style adapter i can use a greddy or dsm bov
if i use the hks style i can use a hks real or fake bov.
or i can buy an evo 9 stock bov for 130$
http://www.maperformance.com/atp-turbo- ... o-8-9.html
hope these work.
basically the hahn kit uses an evo 8 style bov.
the bov attaches onto the piping with a small hose and hose clamps.
the adapters clamp on the piping and have a flange for either an hks or greddy bov
if i use the greddy style adapter i can use a greddy or dsm bov
if i use the hks style i can use a hks real or fake bov.
or i can buy an evo 9 stock bov for 130$
[/quote]Yup it definately needs to go lower. If its not scrapeing constantly why you are driving then its not low enough bro. [/quote]
Hm, that looks like my flange.. I am rocking a Turbo XS knockoff , or you can rock a real one with that round flange.
I love the way mine sounds, never heard another BOV like it, sounds like a bird fluttering it's wings. Never leaks or anything either.
However mine fits directly over the flange and the BOV has little screws built into it that you tighten over the flange.
I love the way mine sounds, never heard another BOV like it, sounds like a bird fluttering it's wings. Never leaks or anything either.
However mine fits directly over the flange and the BOV has little screws built into it that you tighten over the flange.
thisishalcyon.com
@halcyonphoto
@halcyonphoto
- bone-yard-racing
- 2GN Member
- Posts: 2328
- Joined: Fri Dec 15, 2006 9:36 pm
- Location: York PA
- Contact: