want more power swap it.....
As far as head max you can deck is 30, once decked if warps its a throwaway...I don't reccomend.
Going high compresion on single cam worth maybe 20 hp......
20hp for $1200 in just parts isn't cost effective unless your main goal is durability.
Either swap or p&p head, add a comp 400 ( which you already did )and call it a day.
2001 R/T ... More Power ??
You can go .040, there was a guy with a 1gn that went .050 with a crane 14 with no issues. When he added the crane 5 it had problems and blew up.chew* wrote:want more power swap it.....
As far as head max you can deck is 30, once decked if warps its a throwaway...I don't reccomend.
Going high compresion on single cam worth maybe 20 hp......
20hp for $1200 in just parts isn't cost effective unless your main goal is durability.
Either swap or p&p head, add a comp 400 ( which you already did )and call it a day.
So many neons so little time.
https://www.youtube.com/user/invujerry/videos
www.instagram.com/invujerry
-
- Junior Admin
- Posts: 20306
- Joined: Thu May 03, 2007 12:14 pm
- Location: Ashland Ohio
Didn't Arthur on the other .org go .070" when he was experimenting, on a cheap way to bump to ?11.5:1? IIRC, he didn't have any immediate issues with that. I think there was also piston work too, but I seem to recall the head held up fine with that much removed.
Bill
1999 neon coupe 2.4 swap
2021 Forester
2000 Neon MTX swap with '02 R/T PCMOlha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
1999 neon coupe 2.4 swap
2021 Forester
Arthur had to shape his pistons at .070". With the .050" mill it worked fine with a crane 14 and stock SOHC block. Only made 177whp like that .
So many neons so little time.
https://www.youtube.com/user/invujerry/videos
www.instagram.com/invujerry
Sure the head will hold up but shit happens sometime, one over heat can ruin your day or month for that matter.
Also once you add a "real" port into mix your playing with fire the more you take away. If it was steel head id say shred it but aluminum ehh not so frisky myself.
Adding a cam, ported intake, exhaust without porting head is pointless also.
At that point since block is steel I'd deck block over head and rework head if needed if i wanted higher compression that bad.
Many ways to do it.
I'd settle with 160 HP and be happy.....20 more hp not gonna do much for these cars except maybe kill them faster.
Either way the 2.4 swap has more potential and more power out of the box.
I only like the single cam due to reliability myself....least mine is even though its sounded like a diesel for 2 years +
Also once you add a "real" port into mix your playing with fire the more you take away. If it was steel head id say shred it but aluminum ehh not so frisky myself.
Adding a cam, ported intake, exhaust without porting head is pointless also.
At that point since block is steel I'd deck block over head and rework head if needed if i wanted higher compression that bad.
Many ways to do it.
I'd settle with 160 HP and be happy.....20 more hp not gonna do much for these cars except maybe kill them faster.
Either way the 2.4 swap has more potential and more power out of the box.
I only like the single cam due to reliability myself....least mine is even though its sounded like a diesel for 2 years +
But don't street race..!!??If the parts car is cleaner rust wise than your car, swap the inner dash panels (VIN) and use the parts car with your title.