MPx Underdrive pulley
-
- Junior Admin
- Posts: 20306
- Joined: Thu May 03, 2007 12:14 pm
- Location: Ashland Ohio
Meh, call them and tell them you installed it, and found that the wrong belts had been sent. And that you needed the car. I'm sure they will let you exchange the belts, or send you replacements. At least you will have spares.
IDK if you send a copy of the receipt if they would refund that $ instead of sending replacements. It is worth a shot, and gives them a chance to redeem themselves. How can you be disappointed in them, if you don't give them a chance to correct the situation. You technically should have called first to see if they would do that, but what's done is done. The cost of impatience.
Mancini short shipped me on an order yesterday, and a simple phone call has everything the way it should be. No bashing, and everything is cool. It was a simple honest mistake. Shit happens.
IDK if you send a copy of the receipt if they would refund that $ instead of sending replacements. It is worth a shot, and gives them a chance to redeem themselves. How can you be disappointed in them, if you don't give them a chance to correct the situation. You technically should have called first to see if they would do that, but what's done is done. The cost of impatience.
Mancini short shipped me on an order yesterday, and a simple phone call has everything the way it should be. No bashing, and everything is cool. It was a simple honest mistake. Shit happens.
Bill
1999 neon coupe 2.4 swap
2021 Forester
2000 Neon MTX swap with '02 R/T PCMOlha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
1999 neon coupe 2.4 swap
2021 Forester
Hi guys!
What are your ideas on this UDP from NeverEnough?
http://neverenoughauto.com/index.php?di ... t_id=61251
They claim it's a MeganRacing part, but it doesn't look like one IMO... Could this be a case of too good to be true?
What are your ideas on this UDP from NeverEnough?
http://neverenoughauto.com/index.php?di ... t_id=61251
They claim it's a MeganRacing part, but it doesn't look like one IMO... Could this be a case of too good to be true?
http://www.sevenstepsofdenial.com"If god hates masturbation that much, he should give me a girlfriend"
https://www.facebook.com/7StepsOfDenial
Official "I'm Going to Drive My Neon till it's too expensive to keep driving" Club #000083
Pretty sure Megan makes one, but that's unusually cheap. Does it maybe not come with belts?
EDIT:
"Feature:
- Light weight
- Made by Billet Aluminum
- Increase horse power (5-8 more)"
Did an asian person write this?
EDIT:
"Feature:
- Light weight
- Made by Billet Aluminum
- Increase horse power (5-8 more)"
Did an asian person write this?
-Derek
|Donate to 2gn|Feedback || OB's | GozziFab | All Business |
|Donate to 2gn|Feedback || OB's | GozziFab | All Business |
you're right, they're delivered without belts, but i doubt two tiny belts make up for the price difference dunno about the prices there, but here those would cost about € 15 /$ 20 for both
http://www.sevenstepsofdenial.com"If god hates masturbation that much, he should give me a girlfriend"
https://www.facebook.com/7StepsOfDenial
Official "I'm Going to Drive My Neon till it's too expensive to keep driving" Club #000083
-
- 2GN Member
- Posts: 307
- Joined: Sun Nov 15, 2009 9:24 am
-
- 2GN Member
- Posts: 199
- Joined: Mon Mar 28, 2011 12:27 pm
- Location: Columbia, MO
MPx support sucks. 5040500 belt is too big. I don't drive the car often but everytime I start it, the belt squeals or when I need a/c. Tried 2 belts, same number and still the same result. Never gotten a response back about the belt being big. My first product from buying their and will be my last. Bunch of incompetent guys. I give them a rating of 0!
I'll be ditching the UDP and taking a sledge hammer to it. I will be returning to my stock setup where, I know it won't squeal on start up and when I turn the a/c on.
I'll be ditching the UDP and taking a sledge hammer to it. I will be returning to my stock setup where, I know it won't squeal on start up and when I turn the a/c on.
Juice
"There is no "G" in Cummins"
Keep it Mopar, buy Mopar Parts
"There is no "G" in Cummins"
Keep it Mopar, buy Mopar Parts
-
- Junior Admin
- Posts: 20306
- Joined: Thu May 03, 2007 12:14 pm
- Location: Ashland Ohio
Are you sure the alternator belt is tight enough? Only asking because the extra electrical load from the A/C might make it seem like the A/C PS belt is slipping, when it is actually the alternator. Plus you said on start up. That is classic alternator belt; from the load on the battery at start.
I had no issues with belts on my ebay UDP, and they were cheap AutoZone belts. They were the same ones specified for all other UDP's.
I had no issues with belts on my ebay UDP, and they were cheap AutoZone belts. They were the same ones specified for all other UDP's.
Bill
1999 neon coupe 2.4 swap
2021 Forester
2000 Neon MTX swap with '02 R/T PCMOlha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
1999 neon coupe 2.4 swap
2021 Forester
yeah I just read the whole thread and still don't know if I should get one or not :S
running a system + a/c all summer
running a system + a/c all summer
'02 Chrysler Neon RT - SOHC 50trim+Crane 007 ---DEAD---
'05 Dodge Neon SRT4 - DSP & bolt ons ---SOLD---
'08 Dodge Caliber SRT4 - MS1Kv3
Progress Log
-
- Junior Admin
- Posts: 20306
- Joined: Thu May 03, 2007 12:14 pm
- Location: Ashland Ohio
It has no impact on A/C performance. If you run the overdrive pulley for the alternator, you should be fine.
As far as awesome results, it depends on how easily you are impressed.
As far as awesome results, it depends on how easily you are impressed.
Bill
1999 neon coupe 2.4 swap
2021 Forester
2000 Neon MTX swap with '02 R/T PCMOlha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
1999 neon coupe 2.4 swap
2021 Forester
-
- 2GN Member
- Posts: 33
- Joined: Tue Jan 29, 2019 6:38 pm
Re: MPx Underdrive pulley
I'm looking to get an MPx UDP but I've been reading and some people are saying there's and issues with the 02 Neons. What is the issue exactly? I picked up that the knock/misfire sensor is sensitive or something like that, but why would the UDP cause this sensor to trip the CEL? Is there a way to use an UDP without tripping the CEL on an 02?
-
- Junior Admin
- Posts: 20306
- Joined: Thu May 03, 2007 12:14 pm
- Location: Ashland Ohio
Re: MPx Underdrive pulley
Not sure if it was all '02's, or just the RT and ACR's.
Why does it do it? I don't buy into the knock sensor thing, makes zero sense.
My theory with the misfire sensor is this:
The '02 Magnum PCM is more aggressive than the '01 Magnum PCM, because both '01 and '02 Magnum engines have the same power rating, but the '02 has a smaller cam. I think it was also a precursor to the NGC platform in more rigid emission controls.
The UDP removes whatever harmonic cancellations the stock crank pulley provided. So if the crank is oscillating more from the solid pulley being substituted, the crank sensor will see it. If they made the parameters tighter on the misfire detection, then it is going to set a code, and begin flashing the CEL.
Mine progressively got worse, to the point the CEL was flashing at anything over 3900 rpm. I installed a 100 ohm resistor to bypass the fuel sender. This put the fuel gauge at less than 1/8 tank. I no longer got a flashing CEL, but as soon as you keyed off, then started the car either immediately, or the next day/week.whatever, you would get a CEL and the misfire code. Mine would either do P0300, or P0302. Mostly P0302.
There are no symptoms of a misfire.
Given that the fake low fuel reading kept the CEL from flashing, obviously the knock sensor has nothing to do with it. Otherwise, it would still be seeing spark knock, or sense some noise similar to it.
Why did I make the gauge read low you might ask? The PCM will ignore the misfire monitor if the tank is low, to avoid flashing the CEL, or setting a "false code" if the tank is low. But it still set a code, just not as soon as the "fault" was sensed. AFAIK, my false tank reading is as close to anyone ever got to solving the issue. But unfortunately, it was only solved until you started the car again.
As soon as I removed the UDP, and put the original crank pulley back on, there was never again a flashing CEL or misfire code.
To be honest, I really couldn't tell any difference in power, both when I put it on: No noticeable gain, and when I went back to stock: No noticeable loss.
I got more of a seat of the pants gain in throttle response when I installed a new 02 sensor.
The 60mm TB made a far better improvement in throttle response.
Unless you get a UDP for almost free, and don't have to pay to rent any pullers/damper installers it install it, IMHO, it is not worth the hassle and cost.
Why does it do it? I don't buy into the knock sensor thing, makes zero sense.
My theory with the misfire sensor is this:
The '02 Magnum PCM is more aggressive than the '01 Magnum PCM, because both '01 and '02 Magnum engines have the same power rating, but the '02 has a smaller cam. I think it was also a precursor to the NGC platform in more rigid emission controls.
The UDP removes whatever harmonic cancellations the stock crank pulley provided. So if the crank is oscillating more from the solid pulley being substituted, the crank sensor will see it. If they made the parameters tighter on the misfire detection, then it is going to set a code, and begin flashing the CEL.
Mine progressively got worse, to the point the CEL was flashing at anything over 3900 rpm. I installed a 100 ohm resistor to bypass the fuel sender. This put the fuel gauge at less than 1/8 tank. I no longer got a flashing CEL, but as soon as you keyed off, then started the car either immediately, or the next day/week.whatever, you would get a CEL and the misfire code. Mine would either do P0300, or P0302. Mostly P0302.
There are no symptoms of a misfire.
Given that the fake low fuel reading kept the CEL from flashing, obviously the knock sensor has nothing to do with it. Otherwise, it would still be seeing spark knock, or sense some noise similar to it.
Why did I make the gauge read low you might ask? The PCM will ignore the misfire monitor if the tank is low, to avoid flashing the CEL, or setting a "false code" if the tank is low. But it still set a code, just not as soon as the "fault" was sensed. AFAIK, my false tank reading is as close to anyone ever got to solving the issue. But unfortunately, it was only solved until you started the car again.
As soon as I removed the UDP, and put the original crank pulley back on, there was never again a flashing CEL or misfire code.
To be honest, I really couldn't tell any difference in power, both when I put it on: No noticeable gain, and when I went back to stock: No noticeable loss.
I got more of a seat of the pants gain in throttle response when I installed a new 02 sensor.
The 60mm TB made a far better improvement in throttle response.
Unless you get a UDP for almost free, and don't have to pay to rent any pullers/damper installers it install it, IMHO, it is not worth the hassle and cost.
Bill
1999 neon coupe 2.4 swap
2021 Forester
2000 Neon MTX swap with '02 R/T PCMOlha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
1999 neon coupe 2.4 swap
2021 Forester
Re: MPx Underdrive pulley
Must've been a Magnum thing. My old '02 base had zero issues with the UDP. It didn't make a noticeable bump in power for me either.
02 base -> 05 SRT ACR -> 96 sedan -> 99 R/T coupe -> 02 R/T -> 03 SRT