Page 1 of 1

spring question

Posted: Mon Feb 05, 2007 8:19 pm
by danielc24
will 1st gen sport springs lower a 2gn?

Posted: Mon Feb 05, 2007 8:34 pm
by SlvrACR
Yes but to much for a stock strut. Only 1st gens springs that are good for a 2nd gen is the ACR/RT ones. Unless they have the part numbers on them Im not sure how to tell by looking

Posted: Wed Feb 21, 2007 3:52 am
by SinfulNeon
okay as you have mentioned ACR/RT springs are recommended now what else should be pared up with those should we use the shocks as well from that 1st gen and cut the bump stops in half, I get back and forth information on this and I would really like to get this cleared up on one hand I hear your neon handles great with this solution and then I hear you will blow your shocks your ride will be bouncy and so on and I would really like some straight forward answers like if I get the 1st gen ACR/RT springs what is the exact drop and what shocks or whatever should I get with these and what steps to take.

Thanks everyone for your help.