Rear alignment?

Arro · Post by **Arro** » Sat Aug 04, 2007 1:28 am

My rear suspension has LOTS of negative camber on both sides. How is this fixed? Please don't tell me to take it to an alignment shop, I want to know WHAT is done to it, not who can fix it.

jT · Post by jT » Sat Aug 04, 2007 11:23 am

they screw a bolt.

kc2005ptgt · Post by **kc2005ptgt** » Sat Aug 04, 2007 11:27 am

take it to an alignment shop....

Actually, there are 2 bolts on the struts that attaches to the knuckles, the top one is used to adjust the camber I believe... if you have uncorrectable camber (to negative, etc) you need to buy camber correction bolts.

Arro · Post by **Arro** » Sat Aug 04, 2007 2:21 pm

Thanks that's what I wanted to know. I like to go armed with info.

ewetho · Post by **ewetho** » Sun Aug 05, 2007 12:05 am

You can have a clevis bolt replaced with a Camber Adjusting bolt or get adjustable control arms (lateral arms) depending on what your preference is. To do camber you would really need all 4 lateral arms if you just go adjustable arms. Up to 1.5 degrees you should be alright for wear as long as they are even.

sullygully · Post by **sullygully** » Sun Aug 05, 2007 2:29 am

jJst get camber eccentric bolts . There like 20 bucks a piece. Install them yourself, then take it to get professionally alligned