Page 1 of 1

My never ending question . . .

Posted: Thu Oct 25, 2007 3:08 pm
by srt4mike
I have searched and asked many times on SRTforums and I have still found no answer . . . . Does any one know what brake kits fit with the stock BBS rims on an SRT4 ACR? I have seen one pic of a Willwood Kit on, but that is it. I know there is not a lot of room for bigger calipers, but I am just interested to see if there are any other options. Any info is greatly appreciated!

Posted: Thu Oct 25, 2007 7:17 pm
by evilneon02
are you just looking for stopping power i dont know if they get bigger but try looking for the four pistin calipers. i dont know much about brakes but i did see a 4 pistin set up but they wanted over $1000 and i have heard some mustang guys talk about them too. hope this help a little

Posted: Fri Oct 26, 2007 3:16 pm
by srt4mike
evilneon02 wrote:are you just looking for stopping power i dont know if they get bigger but try looking for the four pistin calipers. i dont know much about brakes but i did see a 4 pistin set up but they wanted over $1000 and i have heard some mustang guys talk about them too. hope this help a little
Every 4-piston kit is too large for any rims under 17".

Posted: Fri Oct 26, 2007 3:38 pm
by MoxHair
honestly. You really do not need larger brakes or better calipers.. if you are tracking the car a set of Hawk HP Plus Pads and some power Slotted Rotors will be more than sufficiant.

Posted: Fri Oct 26, 2007 6:35 pm
by hansken_yo
I saw online some where a Brambo kit for the SRT. Didn't mark the site though. It was a four wheel upgrade unlike the Wilwoods.

Posted: Fri Oct 26, 2007 6:48 pm
by srt4mike
MoxHairR/T wrote:honestly. You really do not need larger brakes or better calipers.. if you are tracking the car a set of Hawk HP Plus Pads and some power Slotted Rotors will be more than sufficiant.
I know. It would be my subtle version of "bling" while retaining the stockers. Kind of a waste, but I love the look of aftermarket calipers. Fortunately that is about as rice as I get :)