another direct bolt on swap question

SRT-Wannabe · Post by **SRT-Wannabe** » Sat Mar 15, 2008 3:43 am

Energy Suspension HYPER-FLEX SYSTEM Complete Master SRT4 Bushing Set
http://www.turboneonstore.com/customer/ ... =15&page=1

would i be able to use this product to replace all my bushings, trying to get rid of as much old parts as possible so there's no problems later on the line.

BlackRoseRacing · Post by **BlackRoseRacing** » Sat Mar 15, 2008 7:38 am

That complete kit should work fine with your car

Post by **Diablo0** » Mon Mar 17, 2008 3:04 pm

The only thing that won't work will be the swaybar bushings if you're on stock R/T sways. The endlinks will work fine but since it's made for an SRT it'll probably have bushings in there for the 24MM front and 17MM rear whereas the R/T sways are 22mm and 19mm. Not saying they wouldn't work but the front wouldn't be as tight and the rear would be too small.

SRT-Wannabe · Post by **SRT-Wannabe** » Mon Mar 17, 2008 7:44 pm

wouldn't I just be able to swap out the sway bars from the srt to have that tight suspension? what is the biggest i can use? if not what is the biggest that one would suggest that is safest to use, i really wouldn't want to be spinning out going 160+ or something. but i really do want that tight suspension.

Post by **Diablo0** » Tue Mar 18, 2008 9:47 am

How often are you doing 160+ lol I'd keep yoru R/T bars, the SRT front is larger but the SRT rear is smaller. You could just upgrade to some Progress or Hotchkis bars...

asanti · Post by **asanti** » Wed Mar 19, 2008 7:20 pm

I recommend the Hotchkis sways, definitely.

Later
Allex