2GN.ORG

Ok I am going to be buying SRT sway bars. Go over my parts list and tell me if I need anything else.

4656479AB - Left Clamp
4656478AB - Right Clamp
$4.20 each

Bolts x4 6506203AA - $1.95 each
I also need front and rear endlink sets and bushings
My dealer is out of the clamps and bushings, does any one know if I can get these clamps, bushings, and endlinks somewhere else? I know I can get the bolts at lowes grade 8 8mm-1.25x50mm hex bolt
Thanks

You will need 4 bolts per sway. (For the clamps)

You mentioned front and rear end links so I'm assuming two bars.
I couldn't find any endlinks in the right length locally around my area. The dealer may be your option there, unless you cut to length.

Edit: Maybe I misread that.
The clamps you have listed are for the rear also.

Front clamp: 4656 513AA same both sides
Front screws: 6505 622AA
EditIII:
Are you just reusing the front hardware, and do your rear struts have the provision for a rear sway, since the parts you have listed are for the rear. If you didn't have a rear sway, and the struts are oem, then chances are you will have to fab a bracket, or replace the rear struts.

(Neon, SRT-4)
00-06 Front End Link Kit 4-401
00-06 Rear End Link Kit 19-413

http://www.ajusa.com/details/index/647/ ... TP%204-401

http://www.ajusa.com/details/index/647/ ... P%2019-413

then depending what size bars you are getting

(Neon, SRT-4)
95-06 Front Sway Bar Bushing Kit, 20mm Bar 4-1118
95-99 Front Sway Bar Bushing Kit, 22mm Bar 4-1119
00-06 Front Sway Bar Bushing Kit, 24mm Bar 4-1120
95-99 Rear Sway Bar Bushing Kit, 16mm Bar 4-1111
00-06 Rear Sway Bar Bushing Kit, 12mm Bar 4-1130
00-06 Rear Sway Bar Bushing Kit, 14mm Bar 4-1131
00-06 Rear Sway Bar Bushing Kit, 17mm Bar 4-1137

(the 4-XXXX is the part number you can use to search for the item)

this is all assuming that you want prothane bushings, but why wouldnt you?

Thanks guys this helps out alot. I have the srt suspension so tabs are already on the struts.
Also are the endlink kits here come as a two pack and do the bushings come as a two pack?
The dealers are out of the the clamp brackets for the rear so they would be an order unless I find them online with say grease fittings like the hotchkiss.
This brings me back to my next question, should I just buy the hotchkiss setup? It would already come with everything I need?
Thanks

Prothane endlink and bushing kits always come as two-packs. I doubt that the Hotchkiss kit would contain the clamps you need, but I could be wrong. If you buy Prothanes you don't need any grease fittings.

Hope this helps.