What size are the front sway bar bolts?

kevin25 · Post by **kevin25** » Tue Mar 24, 2009 7:17 pm

I am upgrading to hotchkis

and wanted to replace the front sway bar bolts, I have the size for the rears, but what size do i need for the fronts?
Thanks

hansken_yo · Post by **hansken_yo** » Tue Mar 24, 2009 7:36 pm

Are you talking about the U-bracket bolts? I believe those are the same as the rear.

kevin25 · Post by **kevin25** » Tue Mar 24, 2009 7:40 pm

Yes the 4 bolts that clamp the front swaybar on. You are saying they are the same as the rear?

hansken_yo · Post by **hansken_yo** » Tue Mar 24, 2009 8:20 pm

i can't remember exactly. I know the head is the same and the thread is the same... I'm not sure about the length.

kevin25 · Post by **kevin25** » Tue Mar 24, 2009 9:22 pm

Ok thanks for your help, can anyone else confirm this.

Post by **occasional demons** » Tue Mar 24, 2009 10:21 pm

From your other thread.

rear bolts:

kevin25 wrote:Bolts x4 6506203AA - $1.95 each

occasional demons wrote:Front screws: 6505 622AA

IDK if the difference is length or diameter or both tho.

Sorry don't know what the size is. Prolly 8mm x thread pitch(?)

Caraudioholic24 · Post by **Caraudioholic24** » Wed Mar 25, 2009 1:17 am

yea that was my thread!!!
LOL never did find out about the fronts

kevin25 · Post by **kevin25** » Wed Mar 25, 2009 7:28 am

Ok them are the dealer numbers but I am getting everything from my local lowes. I know I am getting grade 8 bolts, I just need to know before I do the install if the rears are the same size as the fronts?

ZeroChad · Post by **ZeroChad** » Fri Apr 03, 2009 12:59 am

The fronts are 8x1.25