Page 1 of 1
*URGENT* Front Wheel bearings chrysler 02 r/t!
Posted: Wed Sep 09, 2009 4:44 pm
by Kezzo123
I need help!
I have a 2002 chrysler neon r/t RHD and the front wheel bearings are shot. Are they the 33mm wide ones or 39mm? plus where the hell apart from the rip-off chrysler dealer do I buy them? TAH
btw im from the UK and would consider importing as-long as they will be the correct ones?
Thanks for your help in advance as im pretty stuck atm!
Posted: Wed Sep 09, 2009 4:55 pm
by racer12306
Check on the door and see what month/year it was built.
There was actually a recent thread about this and it appears that the change was mid year 2002. It should be on the same sticker as the recommended tire pressures.
Posted: Wed Sep 09, 2009 6:36 pm
by fixitmattman
Posted: Thu Sep 10, 2009 1:25 pm
by Kezzo123
my date of manufacture is 9-01 im guessing i have the 33mm ones then? correct me if im wrong!
Posted: Thu Sep 10, 2009 6:33 pm
by Donkeypuncher
I would think a dealer could look it up by your vin number and tell you. Worst case you could buy both and return the unused one.
I got mine from a local auto parts store, not sure what you guys have out there.
Posted: Fri Sep 11, 2009 3:06 am
by Kezzo123
Well chrysler have gone bump over here. So getting parts is almost impossible now.... I would import aslong i know what i need to import and where from!
thanks for the help
Posted: Fri Sep 11, 2009 12:02 pm
by occasional demons
PM Danteneon, or Black Rose Racing your VIN, and they might be able to tell you what is in there. Other than taking it apart to measure it. Which is prolly not an option.
Posted: Fri Sep 11, 2009 10:49 pm
by Mopar_Korean
you can buy them from Rockauto.com $40 USD each if I remember correctly.
Posted: Wed Sep 16, 2009 8:00 am
by gilly02le
^What he said. Just have them shipped to you.