anyone know? doing this FINALLY soon. Will post pics... u all know how that usually goes. I like to keep u all on ur toes. Ide really appreciate a reply!
Thanks girls
Rear swaybar bracket bolt size?
-
DoubtedNeon
- 2GN Member
- Posts: 1483
- Joined: Mon Jun 16, 2008 5:28 pm
- Location: Larsen, Wisconsin, 54947
Rear swaybar bracket bolt size?
Swordfish2Cowboy wrote:They left a pry bar? Well get the prints like they do on CSI, and track those fuckers down. Then cap them.
grindpunk16 wrote: You and about 2 dozen other folks want that cover. It came with the car, and it's all mine..
-
sidepipe87
- 2009 Silver Contributor
- Posts: 9498
- Joined: Fri May 30, 2008 5:35 pm
- Location: Pittsburgh, PA
- Contact:
Rear Sway Bar Brackets:
4656 478AB - Right - $4.35
4656 479AB - Left - $4.35
Rear Sway Mounting Bolts:
6506203AA - $2.10each
bolts were 8x1.25 IIRC. 13mm head. I just bought them from the dealer. You only really need 3 because you reuse a bolt that is back there already holding something to the frame. Just make sure you shoot it with some PB from above a day before you plan to take it off or it very well could snap off like my front ones did. Also, the other 3 holes will be rusted up so you need to run the appropriate size tap or thread cleaner in them to open up the threads.
4656 478AB - Right - $4.35
4656 479AB - Left - $4.35
Rear Sway Mounting Bolts:
6506203AA - $2.10each
bolts were 8x1.25 IIRC. 13mm head. I just bought them from the dealer. You only really need 3 because you reuse a bolt that is back there already holding something to the frame. Just make sure you shoot it with some PB from above a day before you plan to take it off or it very well could snap off like my front ones did. Also, the other 3 holes will be rusted up so you need to run the appropriate size tap or thread cleaner in them to open up the threads.
PM me for your 03+ PCM SKIM/VIN flashing needs. Neon PCMs Plus
-
DoubtedNeon
- 2GN Member
- Posts: 1483
- Joined: Mon Jun 16, 2008 5:28 pm
- Location: Larsen, Wisconsin, 54947
my rears arent rusted, that bolt however is. lol.
thanks man!
thanks man!
Swordfish2Cowboy wrote:They left a pry bar? Well get the prints like they do on CSI, and track those fuckers down. Then cap them.
grindpunk16 wrote: You and about 2 dozen other folks want that cover. It came with the car, and it's all mine..
-
sidepipe87
- 2009 Silver Contributor
- Posts: 9498
- Joined: Fri May 30, 2008 5:35 pm
- Location: Pittsburgh, PA
- Contact:
Trust me.. the other holes are rusty. When you attempt to put the bolts in them you'll find outDoubtedNeon wrote:my rears arent rusted, that bolt however is. lol.
thanks man!
PM me for your 03+ PCM SKIM/VIN flashing needs. Neon PCMs Plus