PT Cruiser vs. Neon K-frame

Have some questions about how to achive better handling and stopping power using different springs, upgrading to coilovers, questions on swaybars, bushings, different rotors, pads, ect... Having any steering problems or questions about steering racks, tie rods, tie rod ends, ect... ask these questions here.
Post Reply
oskarsbox
Fresh Fish
Posts: 1
Joined: Sat Oct 04, 2014 8:53 am
Location: Vikingstad Sweden

PT Cruiser vs. Neon K-frame

Post by oskarsbox » Sun Oct 05, 2014 2:59 pm

Hi,

The road salt here in Sweden has eaten up the K-frame on my Neon -00.

Does anyone know if a PT Cruiser -07 K-frame will fit my Neon -00?

Thanks
Oskar

Jenni
2GN Member
Posts: 2499
Joined: Tue Aug 23, 2005 1:33 pm
Location: Berlin, Germany

Post by Jenni » Wed Oct 08, 2014 3:19 pm

I guess the older pt k frame should fit.
Not sure if the newer models have differences.

occasional demons
Junior Admin
Posts: 19065
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Wed Oct 08, 2014 6:01 pm

None of them will fit.

Unfortunately BRR's pics no longer work, but believe me, the PT crossmember will not fit a neon.

viewtopic.php?t=47398

Only the front sway bar, and the lower control arms are simple bolt ons. The knuckles and brakes will also work, but you need to install it all as a whole. Basically the same as installing SRT-4 front brakes/knuckles onto a regular neon. It is a package deal.

Remember the PT platform was only (loosely) based on the PL platform, there are only a handful of parts that are actually compatible. And less that are exactly the same.
Bill
dblsg wrote:ya'll a bunch of post whores
epic

2001 Neon ES MTX with '02 R/T PCM
Help support 2GN!

Post Reply

Return to “Suspension, Steering & Brakes”