Knuckles and Brakes and Bearings...

Have some questions about how to achive better handling and stopping power using different springs, upgrading to coilovers, questions on swaybars, bushings, different rotors, pads, ect... Having any steering problems or questions about steering racks, tie rods, tie rod ends, ect... ask these questions here.
Post Reply
User avatar
2GN Member
Posts: 715
Joined: Wed May 12, 2004 2:03 am
Location: Kent, Washington

Knuckles and Brakes and Bearings...

Post by JeremyJ » Thu Jun 21, 2018 6:22 pm

...OH MY!

Sorry. Couldn't help it.

Anyway, I'm possibly scoring a set of PT knuckles with turbo rotors and calipers for cheap. My only hesitation is that they're from a 2001 PT, so the bearings are likely the 33mm variety. I know the later version is wider and supposedly stronger (which makes sense), but first gens have been doing great on tracks with the smaller bearings for years (lots of Lemons and dirt track cars). Kind of makes me think the bearing width might not make much of a difference.

Anyone have track experience with the smaller bearing?
02 base -> 05 SRT ACR -> 96 sedan -> 99 R/T coupe -> 02 R/T -> 03 SRT


Post Reply

Return to “Suspension, Steering & Brakes”