What is your Email Address?: refectv2@gmail.com (pm me for phone number)
What is your City?: Orlando
What is your State?: Florida
What is your Zip code?: 32837
VIN: 1P3ES46C1YD841631
Asking Price: $8,000 OBO
***UPDATED VIDEO TO SHOW THE CAR RUNS AND DRIVE AS OF 12/20/12***
http://youtu.be/YcYssc8PaJ0
I am selling my 2000 Plymouth neon that has been swapped with a fully built, big turbo, 2004 SRT-4 engine and transmission. I started building this car almost 10 years ago slowly adding to it. When I purchased the SRT-4 engine/tranny it had about 12,000 miles on it. The SRT that it came from was hit in the rear so there was no damage done to the engine. When I did the swap the a/c compressor didn't work, so I just pulled the a/c. I still have some a/c compenents if you wanted to put the a/c back in it. I decided to build the motor, and go big turbo when the engine had a little over 20,000 miles on it. Almost all internal engine components were bought from Darrell Cox Racing (I have receipts to show). The motor and tranny was then brought over to one of our previous srtforum vendors, Lujan motor sports, to do the build. After I put everything back together and got the car running again, I got side tracked from buying another car to be my daily driver, and never got around to completely finishing it. This engine is setup to run 500+ hp. Unfortunately, I never got to tune it to run high boost. I have been driving it around on 9psi, but with the turbo and engine setup it can run much higher when tuned. I don't really drive the car anymore, and only put about 5,000-7,000 miles on the engine after the build. So the engine has about 25,000 miles on it. The car itself has about 70,000 - 75,000 miles on it. Everything runs great still, and has always been garage kept. This car is clean inside and out! I am not willing to part anything out. The car is being sold AS IS. This is the perfect project car! Below is a list of current modifications along with some pictures:
Engine/Transmission (ENGINE AND TRANNY HAVE AN ESTIMATED 25K MILES THEM)
-2004 SRT-4 Engine and Transmission swap (ENGINE IS FULLY BUILT/BLUE PRINTED)
-SRT-4 OEM ECU swap
-SRT-4 Radiator and fan swap
-SRT-4 engine bay wiring swap
-DCR option A engine build kit:
---DCR Machined Eagle rods
---DCR custom design wiesco pistons (8.5:1 compression)
---DCR signature coated rod and main bearings
-DCR racing head kit:
---DCR pro intake and exhaust port job
---DCR Head pinning
---DCR Head Chamfer
---DCR prescision resurface
---DCR oversized valves
---DCR valve BackCut
---DCR serdi valve job
---DCR crane valve springs
---DCR valve seals
---DCR oil flow modifier
-DCR 5 layer head gasket
-DCR Head studs
-DCR Oil system kit:
---DCR coated gears with housing
---DCR windage tray
---DCR pickup tube
---DCR crank scrapper w/ baffle
-DCR water injection kit (uses oem windshield washer fluid pump and canister)
-Balanceshaft removed
-Crane cams
-AGP 60-1 turbo kit:
---AGP log style manifold
---60-1 turbonetics T3/T04 turbo
---Turbonetics evolution wastgate and dump tube (9psi spring installed, but I also have a 15psi spring)
-Aaronneon’s Fuel return/FPR kit
-RC Engineering 720cc injectors w/ plug and play clips (not installed on the car)
-Walbro 255 high flow fuel pump
- Greddy Oil catch can
-PTP check valve
-Avid aluminum engine and tranny mounts
-Clutchmasters stage 4 clutch
-A/C DELETE KIT (still has some a/c components if you wanted to put it back in)
-Exhaust depot “Beast” front mount intercooler
-Exhaust depot hard pipe kit
-HKS SSQ blow off valve
-3” Downpipe
-Custom 3” turbo back exhaust piping (no cat)
-HKS carbon fiber TI muffler
Exterior
-Custom blue paint with green metallic
-JT autostyle body kit
-Kaminari KTRII (Carbon fiber center)
-Buddy Club 2 carbon fiber front splitter
-European OEM taillights
-R/T headlights (w/ painted eyelids)
-McCullen 10,000k HIDs
Interior
-Custom painted dash and center console to match car color
-Front speaker kick panels (painted color of the car)
-Fiber glassed rear deck with component speakers (painted color of the car)
-OEM SRT-4 brake and clutch pedals
-OEM SRT-4 Shifter
-OEM SRT-4 Gauge cluster (NOT ACTUAL MILES)
-Autometer dual gauge pod pillar
-Autometer ProComp boost gauge
-Autometer volt meter gauge
Electronics
-JL Audio XR component speakers front and rear
-JL audio 300/4 1st gen slash series amp (powering components)
-Panasonic head unit
-Autometer procomp series wide band
-Apexi AFC Neo
-Greddy Turbo Timer
-Greddy Profec B boost controller
Suspension
-18” RacingHart CR wheels
-Nitto Neogen 215/40/18 tires
-SRT-4 Steering knuckle and hub swap
-SRT-4 steering rack
-SRT-4 Struts (front and rear)
-Aerospeed lowering springs
-SRT-4 front and rear brake swap (no ABS)
-Powerslot front and rear rotors
-DC sports front strut tower bar
















