Allied Composites 2gn & SRT4 Carbon Fiber Pricing V2.1

Own your own shop and want to promote some of you services to us? Maybe you made a deal with a company that if enough people buy a certain product they'll give everyone a cheaper price. Let everyone know about it here.
rice_eater
2GN Member
Posts: 1521
Joined: Tue Jun 28, 2005 1:25 pm
Location: calgary

Allied Composites 2gn & SRT4 Carbon Fiber Pricing V2.1

Post by rice_eater » Thu Nov 23, 2006 2:35 pm

****LATEST EDIT****

Triple pod A pillars are now ready to order

--------------------------------------------------------------------------------------


INTERIOR A PILLAR COVERS:

-FIRST 10 ORDERS $90CAN* (~$78.30US)

1: marakka (cf og)
2:
3:
...
9:
10:

-2GN FINAL PRICE: $110CAN* (~$95.7US)

--------------------------------------------------------------------------------------------------------


INTERIOR A PILLAR COVERS WITH 2 AND 3 POD OPTION:

-OPTION 1- FULL REPLACEMENT 3 POD PILLAR PACKAGE
-3 pod driver side A pillar cover + plain passenger side A pillar
-Intro Price for first 10 orders $150CAN ( ~$129US)

1-
2-
3-
4-
5-
...


Final price will be $175CAN


-OPTION 2- FULL REPLACEMENT 3 POD PILLAR
-3 pod driver side A pillar cover
-Intro Price for first 10 Orders $100CAN ( ~$86US)

1-
2-
3-
4-
5-
...

Final price: $140CAN

-OPTION 3- 3&2 POD OVERLAY
-if you already have a modernperformance or similar 3 or 2 pod A pillar overlay, you can send it to me, and i will wrap it in carbon for you
-AVAILABLE IMEDIATELY


-FIRST 10 ORDERS $60CAN (~$51.60US)
1-
2-
3-
...



-2GN FINAL PRICE: $70CAN* (~$60.20US)

--------------------------------------------------------------------------------------------------------


INTERIOR TOP B PILLAR COVERS:

-FIRST 10 ORDERS $75CAN* (~$65.25US)

1: henry00x (PAID & pending shipment)
2: marakka (cf og)
3: teamlivid
...
9:
10:

-2GN FINAL PRICE: $90CAN* (~$78.30US)

--------------------------------------------------------------------------------------------------------


INTERIOR C PILLAR COVERS:

-FIRST 10 ORDERS $100CAN* (~$87US)

1: henry00x (PAID and SHIPPED)
2: marakka (cf og)
3: teamlivid
...
9:
10:

-2GN FINAL PRICE: $120CAN* (~$104.40US)

--------------------------------------------------------------------------------------------------------

TRUNK LID OVERLAY: >>COMING BACK JAN 2007 W/ PVO MOLDED WING OPTION

1. - marakka >>PAID
2. - neon_ert3 >> DEPOSIT PAID

--------------------------------------------------------------------------------------------------------


INTERIOR DOORSILL COVERS:

-FIRST 10 ORDERS $100CAN* (~$87US)

1: marakka>>paid
2: neon_ert3 >>(deposit on multiple order PAID)
3: -CgPeon- >> (paid, shipped, received)
...
9:
10:

-MAKE IT A PACKAGE FOR $50CAN (~43US) MORE
-Add complementing outer door sills to your inner door sills order for savings and ultimate look

-2GN FINAL PRICE: $120CAN* (~$104.40US)

--------------------------------------------------------------------------------------------------------

OUTER DOOR SILL ADD ONS:
Your option of CBD style or boxy

-FIRST 10 ORDERS $50CAN* (~$43US)

1: marakka>>paid
2: neon_ert3 >>(deposit on multiple order PAID)
3:
...
9:
10:

-2GN FINAL PRICE: $60CAN* (~$51.60US)

--------------------------------------------------------------------------------------------------------

SRT4 or SX BADGE:

-FIRST 10 ORDERS $10CAN* (~$8.70US)

1: marakka (cf og)
2:
3:
...

-2GN FINAL PRICE: $12CAN* (~$10.44US)

--------------------------------------------------------------------------------------------------------


CLUSTER COVER: >>>COMMING BACK VERY VERY SOON!!!! PLEASE SIGN UP IF INTERESTED, NO MONEY COMMITMENT OR DEPOSIT NEEDED

-FIRST 10 ORDERS $55CAN* (~$47.85US)

1:marakka >> PAID
2:
3:
...
9:
10:

-2GN FINAL PRICE: $65CAN* (~$56.65US)

--------------------------------------------------------------------------------------------------------

INTERIOR FUSE BOX PANNEL AND PASSENGER SIDE PANNEL:

LEFT ONLY:
-$40CAN (~$34.40US)
BOTH SIDES:
-$70CAN (~$60.20US)

0- -CgPeon- >> (tester)
1- marakka (cf og)
2- teamlivid (both sides)
3-


--------------------------------------------------------------------------------------------------------


CENTER ARM REST WRAPPING SERVICE:
-this involves taking a stock center armrest and overlaying it in carbon fiber creating a permanent bond and the look of a full carbon piece
-includes sanding and prep work on the arm rest

-FIRST 10 ORDERS $60CAN* (~$51.60US) +$30CAN REFUNDABLE CORE CHARGE

1:
2:
3:
...
9:
10:

-2GN FINAL PRICE: $70CAN* (~$61.20US)

--------------------------------------------------------------------------------------------------------


GLOVE BOX DOOR WRAPPING SERVICE:
-this involves taking a stock glovebox apart, separating the door, and overlaying it in carbon fiber for a permanent overlay and the look of a full carbon piece
-includes sanding and prep work


-FIRST 10 ORDERS $65CAN* (~$55.90US)

1: teamlivid
2:
3:
...

-2GN FINAL PRICE: $75CAN* (~$64.50US)

--------------------------------------------------------------------------------------------------------


IN-TRUNK PLASTIC PIECE OVERLAY:
-this is the plastic piece in the back on the trunk, where the trunk lock is


-FIRST 10 ORDERS $70CAN* (~$61.20US)

1:
2:
3:
...
9:
10:

-2GN FINAL PRICE: $80CAN* (~$68.80US)


--------------------------------------------------------------------------------------------------------


SIDE MARKER DELETES:
COMMING VERY VERY SOON






INFO:

-all panels are made from carbon and epoxy, and professionally clear coated
-install over stock trim with 3M Super77 spray adhesive takes less than a minute and will create an almost permanent hold
-3M Super77 is the industry leader in spray adhesives, used very commonly by contractors of all types... it can be found at your local Home Depot;
-i cannot ship aerosols across the border without it being stupid expensive, so i cannot ship 3M Super77 with your order, you have to get it on your own locally please.
-doublesided tape is an option, but should only be considered as a last resort or as something temporary
-if you would like your own parts wrapped, simply ship them to me at

George Dumitrescu
10395 Rockyledge Street NW
Calgary Alberta, T3G 5P8

i do not charge extra for this... what i do is sand your parts down, then overlay the carbon directly on, for a permanent hold




OPTIONAL SERVICES
-colored fabrics, including yellow, red and blue kevlar/carbon hybrids are available upon request
-aluminized fiberglass (aka silver carbon, texalium, etc....) is available aswell... please remember, despite the marketing bs from other companies, this is NOT carbon fiber.
-if you are concerned about durability, all parts can be made as THICK as you need
-extra thick clearcoating available upon request
-professional grade polishing available for all parts, for those looking for the ultimate show ready look
-raised lettering or designs available where possible
-i don't mind helping anyone and everyone so if you have some other personal stuff you'd like done, or if you're interested in a small to medium production run for a specific part simply PM me
-entrepreneurial minded members and commercial partners welcomed

ORDERING:
-please paypal all orders in CANADIAN dollars, to avoid price swings due to currency fluctuations... for example, over the last couple months, the price in US dollars for these parts has dropped about $10/piece due to a drop in the Canadian dollar... this means FREE MONEY in your pocket, without affecting my bottom line :)
-please PM me or post here for a shipping quote before paypaling me money, to avoid having to do it twice
-most orders will be started once money or deposit is received, unless i have the parts in stock. please expect a 2 to 3 week delivery time;
-my paypal is georged_83@hotmail.com


WARRANTY:
-if there are issues with your parts, simply ship them back for a full refund or replacement


COMING SOON:
-auto shifter trim
-steering column surround
-fog light covers
-under hood fuse box cover
-head trim
-your suggestion here







Image

Image

Image

Image

Image

Image

Image

Image

Image

Image


in various stages...

Image

Image

Image

Image

Image

Image

Image

Image

Image
Last edited by rice_eater on Sun Dec 10, 2006 1:43 am, edited 10 times in total.

TNK
2GN Veteran
Posts: 17343
Joined: Fri Jun 11, 2004 12:41 pm
Location: The Evergreen State

Post by TNK » Thu Nov 23, 2006 2:49 pm

DIBS ON THE FIRST SIDE MARKER DELETES! i will paypal you as soon as you tell me a price....


you forgot to add the CF air freshener trees DOOD!
Image

Modify Your Car - Modify Your Body - Modify Your Life
TheRandom1 wrote:My true opinion here is that the only time rubber should be stretched is when it's going over a penis.

rice_eater
2GN Member
Posts: 1521
Joined: Tue Jun 28, 2005 1:25 pm
Location: calgary

Post by rice_eater » Sat Nov 25, 2006 5:17 am

bump for second round of pictures

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

User avatar
BlackRoseRacing
2009 Platinum Contributor
Posts: 12729
Joined: Sat Dec 25, 2004 8:58 am
Location: WNY
Contact:

Post by BlackRoseRacing » Sat Nov 25, 2006 6:46 am

Image

SWEET, looks like your making CF trunk lids now to Vs overlays! :D
Image
Official "I'm Going to Drive My Neon till it Dies" Club #666
(she officially died in 2018 by being donated to a church...seriously)

rice_eater
2GN Member
Posts: 1521
Joined: Tue Jun 28, 2005 1:25 pm
Location: calgary

Post by rice_eater » Sat Nov 25, 2006 10:43 am

that's the original attempt, but still thanks :D ... i never said i cant do it, it's just a bitch and a half to get right :shy: i just need to get a little better, and i'll be trying that stuff again

User avatar
z3roneo
2GN Member
Posts: 3543
Joined: Mon Jan 31, 2005 12:08 am
Location: Humble,Tx
Contact:

Re: FiberImage 2gn & SRT4 Carbon Fiber Price List V1.0

Post by z3roneo » Sat Nov 25, 2006 12:16 pm

rice_eater wrote: --------------------------------------------------------------------------------------------------------


INTERIOR A PILLAR COVERS WITH 2 AND 3 POD OPTION:

-OPTION 1- FULL REPLACEMENT 3 POD PILLAR PACKAGE
-3 pod driver side A pillar cover + plain passenger side A pillar
-Intro Price: $150CAN ( ~$129US) >>After Intro>>$175CAN
-COMING BACK SOON!!!!!!!

-OPTION 2- FULL REPLACEMENT 3 POD PILLAR
-3 pod driver side A pillar cover
-Intro Price: $100CAN ( ~$86US) >> After Intro>> $140CAN
-COMING BACK SOON!!!!!!!

-OPTION 3- 3&2 POD OVERLAY
-if you already have a modernperformance or similar 3 or 2 pod A pillar overlay, you can send it to me, and i will wrap it in carbon for you
-AVAILABLE IMEDIATELY


-FIRST 10 ORDERS $60CAN (~$51.60US)
1-
2-
3-
...



-2GN FINAL PRICE: $70CAN* (~$60.20US)

--------------------------------------------------------------------------------------------------------
I'm lost here.... So whats the actually price??? I'm leaning towards option 1... Kinda confussed cuz you have the price next to it, and then below you have another price for the 1st 10 orders... :scratch: Can you help me out here??

Also are you still gonna make the dash overlay as well??
2000 2.4L Turbocharged Neon (The Monster)
2005 5.7L Hemi Jeep Grand Cherokee (SRT8 Clone)


Image

rice_eater
2GN Member
Posts: 1521
Joined: Tue Jun 28, 2005 1:25 pm
Location: calgary

Post by rice_eater » Sat Nov 25, 2006 1:01 pm

sorry for the confusion... i just put a 1-10 for the people that have a 3 or 2 pod pillar already and want to start signing up... i will add a signup list below the other options, hopefully come this monday, when i know for sure i can separate the carbon piece from the mold... so you should see signup slots under each "option" when that's ready...

in short, the price you see of $60can, is actually to wrap your pod pillars if you already have one... like i said, the only reason i sorta stopped making the pillars for a couple weeks was coz i couldnt pry off the new carbon piece off hte mold... i figure, if you already have a pod pillar and want it wrapped in carbon, then the whole point is for the overlay to never come off again... since i've definately achieved that, i saw no reason to keep some of you from needlesly waiting any longer :P

My plan B if i fail to remove the overlays from the molds, is to just buy a lot of modern pillars at a discount, overlay them permanently and sell them like that, so no one has to send me their own and waste money on shipping... the price would be about the same so that's not a huge concern, but either way, that's something i'm gonna have to figure out on my own, and i wont bore you with it too much :wink:

as for the dash... yes i really really want to... but i think they will be full wrappings, not just overlays, so that all the contours are covered, including the overhang above the gauge cluster... i have a handfull of people DYING for those, so one way or another i will find a way to do them nicely...

User avatar
z3roneo
2GN Member
Posts: 3543
Joined: Mon Jan 31, 2005 12:08 am
Location: Humble,Tx
Contact:

Post by z3roneo » Sat Nov 25, 2006 3:51 pm

Sweet... lemme know when you figure out what you're gonna do bout those cuz i really would like those in the ride... and hell yea on the cf dash... That'll definitely have to be in there top match the top and stuff....

Looks like I found what I'll be spending money on...
2000 2.4L Turbocharged Neon (The Monster)
2005 5.7L Hemi Jeep Grand Cherokee (SRT8 Clone)


Image

teamliviD
ECN Moderator
Posts: 2143
Joined: Fri Nov 18, 2005 4:34 am
Location: maryland
Contact:

Post by teamliviD » Sat Nov 25, 2006 10:12 pm

Dont forget to add me to the:

interior doorsill covers
outer doorsill add-ons
cluster cover
in trunk plastic piece

Thanks!!!
Joe
team liviD
2K5 Black SRT-4
2K2 Black R/T..thats right I'm bringing her back!!
2K6 Red Charger R/T

ECN v2.0 IS HERE.....
Support 2gn! viewtopic.php?t=39019

certob05
Fresh Fish
Posts: 1
Joined: Sat Nov 25, 2006 10:17 pm
Location: Texas

i am down for the inside pillars

Post by certob05 » Sat Nov 25, 2006 10:20 pm

the ones for the back of the car also the pillars for the inside near the dash!! and the ones on the dash!! please put me down for those sets!!!

CONTACT ME here or on SRTFORUMS SN orangeblast05tx

whyconform
2GN Member
Posts: 203
Joined: Sun Oct 08, 2006 11:52 pm
Location: nj
Contact:

Post by whyconform » Wed Nov 29, 2006 3:02 am

pmd
Image

User avatar
03sxt
Former Jr. Admin
Posts: 11389
Joined: Wed May 11, 2005 10:53 am
Location: Conneaut, Ohio
Contact:

Post by 03sxt » Wed Nov 29, 2006 9:28 pm

I'd like one of the Red/Carbon Fiber SXT badges for the front bumper for my '03. :-D

You have these readily available?

PM me with your PayPal info and amount due shipped to 44030. Thanks!

seisephiroth
2GN Member
Posts: 958
Joined: Wed Jan 11, 2006 11:32 am
Location: Lynchburg, VA

Post by seisephiroth » Wed Nov 29, 2006 11:41 pm

=P~ at cf dash in red cf as well as other things but i need other parts first :evil:
The Millennium Falcon of Neons

2000 Plymouth Neon SRT-4 Swap (For Sale)
2002 Subaru Impreza WRX the daily whip

User avatar
Frizbe
2GN Member
Posts: 2984
Joined: Wed Sep 22, 2004 11:41 pm
Location: Denver, CO
Contact:

Post by Frizbe » Wed Nov 29, 2006 11:53 pm

Make a website for info and orders. Hey I just so happen to know an apiring web designer also!
Justin- I have nothing but smart ass remarks to add.
:-s
Fire_Hippo wrote:Frizbe, you rock my socks.
- Jeff's girlfriend
Image

rice_eater
2GN Member
Posts: 1521
Joined: Tue Jun 28, 2005 1:25 pm
Location: calgary

Post by rice_eater » Thu Nov 30, 2006 2:22 am

03sxt wrote:I'd like one of the Red/Carbon Fiber SXT badges for the front bumper for my '03. :-D

You have these readily available?

PM me with your PayPal info and amount due shipped to 44030. Thanks!
whyconform wrote:pmd
replied 8)

User avatar
NiteHawk
2GN Member
Posts: 3130
Joined: Sun Nov 13, 2005 10:48 am
Location: Export, PA
Contact:

Post by NiteHawk » Thu Nov 30, 2006 3:40 am

Frizbe wrote:Make a website for info and orders. Hey I just so happen to know an apiring web designer also!
backoff ;-) this one's mine
Matt Cresto
Fueled By Matt
Fueling Your Passion

Fuel systems turbo kits and components, tuning, performance parts. Contact us for all of your performance needs.

User avatar
Frizbe
2GN Member
Posts: 2984
Joined: Wed Sep 22, 2004 11:41 pm
Location: Denver, CO
Contact:

Post by Frizbe » Thu Nov 30, 2006 3:54 am

NiteHawk wrote:
Frizbe wrote:Make a website for info and orders. Hey I just so happen to know an apiring web designer also!
backoff ;-) this one's mine
Damnit! :x I need more professional references.
Justin- I have nothing but smart ass remarks to add.
:-s
Fire_Hippo wrote:Frizbe, you rock my socks.
- Jeff's girlfriend
Image

Srt4Me03
2GN Member
Posts: 43
Joined: Fri Sep 22, 2006 10:15 am
Location: Hotter then hell FLORIDA !!

Post by Srt4Me03 » Thu Nov 30, 2006 8:17 am

WOW.... thats some nice work sir !! and the prices are excellent. Anyway you can put me down for a 3 pod guage A pillar and the right side matching A pillar??

rice_eater
2GN Member
Posts: 1521
Joined: Tue Jun 28, 2005 1:25 pm
Location: calgary

Post by rice_eater » Thu Nov 30, 2006 5:53 pm

Srt4Me03 wrote:WOW.... thats some nice work sir !! and the prices are excellent. Anyway you can put me down for a 3 pod guage A pillar and the right side matching A pillar??
definately... i'll get back to everyone with info on that very soon 8)

User avatar
LCPLPunk
2GN Member
Posts: 1238
Joined: Sat May 14, 2005 10:28 pm
Location: Central Florida
Contact:

Post by LCPLPunk » Thu Nov 30, 2006 10:01 pm

so these are covers? how do they apply to the stock pieces? how resilient is the CF trunk cover? how is it applied? rain proof?

how bout a CF hood cover? :)
2001 Neon R/T
Deyeme Motor Mounts, Booger Bushings, JohnnyMopar Cradle Bushings, SRT Silver shift knob, Maddog STS, SRT Rear Seat, K&N WAI, Magnecore Wires, Mobil 1 Full Synthetic Oil, Coil pack heat shield
""The bitterest tears shed over graves are for words left unsaid and deeds left undone" - Harriet Beecher Stowe"

flybye4
2GN Member
Posts: 110
Joined: Mon Apr 24, 2006 1:27 am
Location: Ohio
Contact:

Post by flybye4 » Fri Dec 01, 2006 1:24 am

daaaamn....i will deffinatly be picking up a few things for the srt real soon!


that is some really nice work! 8)
Image

Srt4Me03
2GN Member
Posts: 43
Joined: Fri Sep 22, 2006 10:15 am
Location: Hotter then hell FLORIDA !!

Post by Srt4Me03 » Fri Dec 01, 2006 8:32 am

flybye4 wrote:daaaamn....i will deffinatly be picking up a few things for the srt real soon!


that is some really nice work! 8)

Hey you on here too?? STOP FOLLOWING ME !! ... lol.... never sold the rims eh?

702Neon
2GN Member
Posts: 885
Joined: Mon Apr 24, 2006 4:38 am
Location: Las Vegas

Post by 702Neon » Wed Dec 06, 2006 1:15 pm

duuude. can you make a CF rear view mirror cover?
Sin City Neons In Da Haus!
Image

User avatar
LCPLPunk
2GN Member
Posts: 1238
Joined: Sat May 14, 2005 10:28 pm
Location: Central Florida
Contact:

Post by LCPLPunk » Wed Dec 06, 2006 7:21 pm

how bout a CF fuse box cover?
2001 Neon R/T
Deyeme Motor Mounts, Booger Bushings, JohnnyMopar Cradle Bushings, SRT Silver shift knob, Maddog STS, SRT Rear Seat, K&N WAI, Magnecore Wires, Mobil 1 Full Synthetic Oil, Coil pack heat shield
""The bitterest tears shed over graves are for words left unsaid and deeds left undone" - Harriet Beecher Stowe"

User avatar
NiteHawk
2GN Member
Posts: 3130
Joined: Sun Nov 13, 2005 10:48 am
Location: Export, PA
Contact:

Post by NiteHawk » Wed Dec 06, 2006 8:20 pm

LCPLPunk wrote:how bout a CF fuse box cover?
he makes that already :)
Matt Cresto
Fueled By Matt
Fueling Your Passion

Fuel systems turbo kits and components, tuning, performance parts. Contact us for all of your performance needs.

rice_eater
2GN Member
Posts: 1521
Joined: Tue Jun 28, 2005 1:25 pm
Location: calgary

Post by rice_eater » Fri Dec 08, 2006 7:52 pm

REPLACEMENT 3 pod A pillar overlays are now available for ordering... as with all other parts, dibs can be called if you want to save a spot on the original group buy list, but orders will be delivered in the order of received payment... if all spots are filled, people who called dibs will be given one last chance, after which they will be dropped from the list...



here are some pics of the TEST 3 pod pillar i just finished removing off the mold... it's not my best workmanship, but this is just a fiberglass mock up i did to test the new mold release wax i'm using... it worked flawlesly so now i'm ready to take orders :twisted:


Image
Image







NiteHawk wrote:
LCPLPunk wrote:how bout a CF fuse box cover?
he makes that already :)
i think he makes the underhood one... yes, i've started one of those too, pics coming soon

Srt4Me03
2GN Member
Posts: 43
Joined: Fri Sep 22, 2006 10:15 am
Location: Hotter then hell FLORIDA !!

Post by Srt4Me03 » Sat Dec 09, 2006 5:44 pm

So you're A pillar pod's just overlay on the stock pillar pod? What do you use to fasten them on with?
Image

rice_eater
2GN Member
Posts: 1521
Joined: Tue Jun 28, 2005 1:25 pm
Location: calgary

Post by rice_eater » Sat Dec 09, 2006 6:17 pm

Srt4Me03 wrote:So you're A pillar pod's just overlay on the stock pillar pod? What do you use to fasten them on with?
the triple pods are overlays for the stock pillars, just like the modernperformance plastic ones... if you already have a modern pillar, you have the option to send it to me to overlay it, or you can replace it with one of these carbon ones...

ALL of this stuff can be held down with 3M Super 77 spray adhesive... buy one can, and use it on everything. alternatively you can use doublesided tape;



here is a preview of the upcoming steering column surrounds... price will be around $70CAN for the 2 halves

Image
Image

User avatar
Canada
Junior Admin
Posts: 4816
Joined: Tue Jun 28, 2005 4:05 pm
Location: Island Grove, Ontario, Canada

Post by Canada » Sat Dec 09, 2006 6:43 pm

Ummm, where's the hole for teh hazards?

rice_eater
2GN Member
Posts: 1521
Joined: Tue Jun 28, 2005 1:25 pm
Location: calgary

Post by rice_eater » Sat Dec 09, 2006 7:28 pm

EclecticBlue wrote:Ummm, where's the hole for teh hazards?
oh come on man, do you think i'm such a noob :wink: i didnt have time to cut it off... i still need to do the key hole and the bolt holes...hence why this is just a preview 8)

Locked

Return to “Vendors / Group Buys”