Allied Composites - Back and here to stay :)

Own your own shop and want to promote some of you services to us? Maybe you made a deal with a company that if enough people buy a certain product they'll give everyone a cheaper price. Let everyone know about it here.
rice_eater
2GN Member
Posts: 1521
Joined: Tue Jun 28, 2005 1:25 pm
Location: calgary

Allied Composites - Back and here to stay :)

Post by rice_eater » Fri May 18, 2007 12:39 pm

Hey guys... after the original fuck-ups, i just went away and got everything set up and organized for an eventual return... All of the original orders that i was backed up with have been filled, minus a few wings and a triple pod for Matt... I've been building up inventory of everything else i make however, and i'm ready to slowly re-open the floodgates to you guys...

Please check out my new website... almost everything is up and ready, except for some sections that still need some updates or more pictures...

The May Specials page will be activated first... you will be able to order the Exterior C Pillars and Sidemarkers first, and once everything is ready, all the other links will be active... I have about 10 sets of each of the C pillars and sidemarkers, so delivery would be right away. Please check back in a day or two for an option to BUY, directly from the website. (NOTE:at the moment, all the prices on the website are in CANADIAN dollars, even in the US section...)

www.alliedcomposites.com

Thanks guys :)
George
Last edited by rice_eater on Sat Jun 16, 2007 10:34 pm, edited 1 time in total.

Mr Josh Zombie
2010 Platinum Contributor
Posts: 8357
Joined: Tue Aug 22, 2006 8:43 pm
Location: Toledo, OH

Post by Mr Josh Zombie » Fri May 18, 2007 1:35 pm

Can you link to proof of everyones order being filled?
Modify your Car • Modify your Body • Modify your Life

User avatar
NiteHawk
2GN Member
Posts: 3130
Joined: Sun Nov 13, 2005 10:48 am
Location: Export, PA
Contact:

Post by NiteHawk » Fri May 18, 2007 1:43 pm

no links, but i did get all of my carbon except for a 3pod pillar set and the fiberglass wings. george says that a box of wings were shipped, so we'll see when those show up
Matt Cresto
Fueled By Matt
Fueling Your Passion

Fuel systems turbo kits and components, tuning, performance parts. Contact us for all of your performance needs.

rice_eater
2GN Member
Posts: 1521
Joined: Tue Jun 28, 2005 1:25 pm
Location: calgary

Post by rice_eater » Fri May 18, 2007 2:30 pm

Opi wrote:Can you link to proof of everyones order being filled?
no, but everyone is welcome to sift through the old srtforums section and decide for yourself... i don't expect everyone to rush to jump back on the bandwagon, so if you dont feel comfortable yet, no hard feelings

sullygully
2GN Member
Posts: 1267
Joined: Mon Aug 08, 2005 8:23 pm
Location: Banff, Alberta

Post by sullygully » Fri May 18, 2007 2:44 pm

^ Are you ready to start making Cf Trunk overlays again? I've wanted one for so long

User avatar
BlackRoseRacing
2009 Platinum Contributor
Posts: 12729
Joined: Sat Dec 25, 2004 8:58 am
Location: WNY

Post by BlackRoseRacing » Sun May 20, 2007 8:57 am

Its good to see your back :)
Just keep this in mind, dont take on more than you can chew this time. Only offer what you have and not going to have, this way items can be shipped promptly and everyone stays happy.
Godd luck
BRR
Image
Official "I'm Going to Drive My Neon till it Dies" Club #666
(she officially died in 2018 by being donated to a church...seriously)

User avatar
Diablo0
2GN.org Owner/Admin
Posts: 12574
Joined: Thu Apr 15, 2004 11:20 pm
Location: Greenville, SC
Contact:

Post by Diablo0 » Sun May 20, 2007 12:48 pm

-Jason
Black '02 Neon R/T | White '02 Neon R/T - SRT-4 Engine Swap
Image
^^^ no, that isn't what I look like haha
Try not to become a man of success but rather to become a man of value. - Albert Einstein

rice_eater
2GN Member
Posts: 1521
Joined: Tue Jun 28, 2005 1:25 pm
Location: calgary

Post by rice_eater » Sun May 20, 2007 3:15 pm

http://alliedcomposites.com/george/website/contact.html


can also be accessed from the main page on my website. All my contact info, and business registration is there :thumbup:

Riddler
2GN Member
Posts: 177
Joined: Sat Jun 03, 2006 11:18 pm
Contact:

Post by Riddler » Sun May 20, 2007 4:47 pm

Good to see you back....

Riddler
Image

rice_eater
2GN Member
Posts: 1521
Joined: Tue Jun 28, 2005 1:25 pm
Location: calgary

Post by rice_eater » Sun May 20, 2007 5:50 pm

sullygully wrote:^ Are you ready to start making Cf Trunk overlays again? I've wanted one for so long
not really at the moment... i've been trying to find one at a local jyard, but the ones i found they wanted an arm and a leg for (100+) :roll: i'm hoping to be able to snap one up off one of the SRT guys locally, when they upgrade to CF....

but you're local to me, so maybe if you have the car parked for about a week we can figure something out? I dont mind driving up to the mountains to meet you, i like taking cruises going that way... maybe in Canmore or by that Exshaw Quarry?
Riddler wrote:Good to see you back....

Riddler
i think i made at least 20-30 sets of exterior C pillars off of the plastic ones you sent me :thumbup:

sullygully
2GN Member
Posts: 1267
Joined: Mon Aug 08, 2005 8:23 pm
Location: Banff, Alberta

Post by sullygully » Sun May 20, 2007 6:45 pm

rice_eater wrote:
sullygully wrote:^ Are you ready to start making Cf Trunk overlays again? I've wanted one for so long
not really at the moment... i've been trying to find one at a local jyard, but the ones i found they wanted an arm and a leg for (100+) :roll: i'm hoping to be able to snap one up off one of the SRT guys locally, when they upgrade to CF....

but you're local to me, so maybe if you have the car parked for about a week we can figure something out? I dont mind driving up to the mountains to meet you, i like taking cruises going that way... maybe in Canmore or by that Exshaw Quarry?
For sure man. If we can find used trunk for the right price, then i have no problems splitting the cost with you on it. :thumbup: If I had a garage to keep my car in, then i'd have no problems taking the trunk off, but unfortunately I don't. Worst case senario, i could drop my car off at your shop, and then catch a ride back into town

rice_eater
2GN Member
Posts: 1521
Joined: Tue Jun 28, 2005 1:25 pm
Location: calgary

Post by rice_eater » Sun May 20, 2007 7:19 pm

so you want an overlay then, or would you rather have yours or a stocker laminated?

just wondering... if you have a yard, i have those fiberglass trunks that i made last year, so i could lend you one so you dont get rain in the car or whatever... they wont lock or bolt in, but they wont let water in... it's an idea... one dude was gonna sell me his for 75, but he was in BC....

parking it at my new place wont work, i dont have any room for it there unfortunately :(

sullygully
2GN Member
Posts: 1267
Joined: Mon Aug 08, 2005 8:23 pm
Location: Banff, Alberta

Post by sullygully » Sun May 20, 2007 9:39 pm

pm'd :thumbup:

supertrick_05
2GN Member
Posts: 4225
Joined: Thu Jul 21, 2005 9:09 pm
Location: Duluth, MN
Contact:

Post by supertrick_05 » Fri May 25, 2007 3:01 pm

I'm really hoping to get all my pillars replaced with your carbon ones...still not sure if I want reg. A-pillars or if I wanna get some gauges in there...I'll let ya know though.
-Brodie
Image
2002 Dodge Neon ACR - Needs LOTS of love, but I'm gonna slowly get her to where she deserves to be :)

User avatar
[DJ]Tomski
2GN Member
Posts: 729
Joined: Mon Feb 13, 2006 2:10 pm
Location: IL

Post by [DJ]Tomski » Fri May 25, 2007 4:19 pm

lmao carbon fiber toilet seats. effin awesome!!!
Image
j0n wrote:I recently discovered that I was modifying a neon and came to my senses...
:rofl:

User avatar
SGT BRAD
2GN Member
Posts: 1134
Joined: Fri Feb 11, 2005 4:56 pm

Post by SGT BRAD » Mon Jun 04, 2007 11:18 am

george,
good to see you're back. keep the work load down to a manageable level and stick around for awhile this time!!!
ooh...there's a glimmer of the dream left!!!

Riddler
2GN Member
Posts: 177
Joined: Sat Jun 03, 2006 11:18 pm
Contact:

Post by Riddler » Tue Jun 05, 2007 11:09 pm

rice_eater wrote:
sullygully wrote:^ Are you ready to start making Cf Trunk overlays again? I've wanted one for so long
not really at the moment... i've been trying to find one at a local jyard, but the ones i found they wanted an arm and a leg for (100+) :roll: i'm hoping to be able to snap one up off one of the SRT guys locally, when they upgrade to CF....

but you're local to me, so maybe if you have the car parked for about a week we can figure something out? I dont mind driving up to the mountains to meet you, i like taking cruises going that way... maybe in Canmore or by that Exshaw Quarry?
Riddler wrote:Good to see you back....

Riddler
i think i made at least 20-30 sets of exterior C pillars off of the plastic ones you sent me :thumbup:
Makes me wish I would of included some CF parts in the sale.

Riddler
Image

glasswars
2GN Veteran
Posts: 5476
Joined: Fri Jul 07, 2006 4:30 pm
Location: NNJ

Post by glasswars » Fri Jun 15, 2007 4:59 pm

Anyone order from him yet? I wanna order the C pillar and side marker overlay special but I'm sooo skeptical...
thisishalcyon.com
@halcyonphoto

rice_eater
2GN Member
Posts: 1521
Joined: Tue Jun 28, 2005 1:25 pm
Location: calgary

Post by rice_eater » Sat Jun 16, 2007 9:07 pm

sullygully has brought his trunk to me to have it laminated, and has got it back already and on his car for a show... he's come over and seen my whole "operation", so feel free to ask him...

Image
Image
Image
Image







my local srt owners are really happy with what i've delivered for them so far and are keeping me super busy, so as i get installed pictures from them they'll be up on the website under members rides, and hopefully the long list of happy people will put any concerns asside...

i have stock now of all the old things i make (less triple pods, glove box doors, and center arm rests), and i've made a whole bunch of new smurf because people have been screaming for it...

rad shroud

Image

Image

Image

Image

Image

Image

Image

Image




b pillars

Image

Image

Image

Image

Image

Image

Image



exhaust surrounds


Image

Image

Image




foglight deletes

Image

Image

Image







my suggestion for a smooth and fast transaction, is to please check with me on availability before ordering, because like i said, some items i dont keep stock off yet, while others i have tons of... as long as you're asking for something that i'm already making, i more than likely have it in stock and can ship it out the next day.... make your own decissions, but i think despite my flaws, the fact that eventually all orders have been filled, and that i just finished making all the last things you guys requested (exterior Bs, rad shourds, and exhaust surrounds), i think that should still count for something angel12

take a look on the website, i've been updating some of the sections

www.alliedcomposites.com
Last edited by rice_eater on Sun Jun 17, 2007 12:49 am, edited 5 times in total.

OB
Former Moderator
Posts: 9686
Joined: Tue Nov 15, 2005 9:38 pm
Location: Bay Area, CA

Post by OB » Sat Jun 16, 2007 9:27 pm

do the rad shrouds work on the reg neons as well? I was thinkin about making one of those but if yours works then id rather go with that.
-Derek

|Donate to 2gn|Feedback || OB's | GozziFab | All Business |


rice_eater
2GN Member
Posts: 1521
Joined: Tue Jun 28, 2005 1:25 pm
Location: calgary

Post by rice_eater » Sat Jun 16, 2007 9:30 pm

OB wrote:do the rad shrouds work on the reg neons as well? I was thinkin about making one of those but if yours works then id rather go with that.
i automatically assumed they would, but i'll go out and check

OB
Former Moderator
Posts: 9686
Joined: Tue Nov 15, 2005 9:38 pm
Location: Bay Area, CA

Post by OB » Sat Jun 16, 2007 9:36 pm

yeah I thought so as well, but who knows.
-Derek

|Donate to 2gn|Feedback || OB's | GozziFab | All Business |


rice_eater
2GN Member
Posts: 1521
Joined: Tue Jun 28, 2005 1:25 pm
Location: calgary

Post by rice_eater » Sat Jun 16, 2007 9:55 pm

yeah it fits perfect on my 05 SX....

User avatar
03sxt
Former Jr. Admin
Posts: 11389
Joined: Wed May 11, 2005 10:53 am
Location: Conneaut, Ohio
Contact:

Post by 03sxt » Sun Jun 17, 2007 12:03 am

How's my badge coming along?

:beatstick:

rice_eater
2GN Member
Posts: 1521
Joined: Tue Jun 28, 2005 1:25 pm
Location: calgary

Post by rice_eater » Sun Jun 17, 2007 12:40 am

glasswars wrote:Anyone order from him yet? I wanna order the C pillar and side marker overlay special but I'm sooo skeptical...
everything you see here is unspoken for.... if you see something you like, it can ship out tomorrow.... (if anyone is wondering, that is dust on some of the parts)

Image

Image

Image

Image

Image
03sxt wrote:How's my badge coming along?

:beatstick:
in all honesty i haven't touched it, but i will pull the bumper off in the morning and i'll get to it... i'll install one of the rad shrouds as well, and take some pictures for you guys...

teamliviD
ECN Moderator
Posts: 2143
Joined: Fri Nov 18, 2005 4:34 am
Location: maryland
Contact:

Post by teamliviD » Sun Jun 17, 2007 1:36 am

Wow!! You have been busy!!!! :rockon:
Joe
team liviD
2K5 Black SRT-4
2K2 Black R/T..thats right I'm bringing her back!!
2K6 Red Charger R/T

ECN v2.0 IS HERE.....
Support 2gn! viewtopic.php?t=39019

User avatar
Canada
Junior Admin
Posts: 4816
Joined: Tue Jun 28, 2005 4:05 pm
Location: Island Grove, Ontario, Canada

Post by Canada » Sun Jun 17, 2007 8:46 am

George, are you going to make the PVO/AVS style rear spoiler? I got one from CBD and its such a POS I want one that fits properly and looks good without alot of blemishes!!

glasswars
2GN Veteran
Posts: 5476
Joined: Fri Jul 07, 2006 4:30 pm
Location: NNJ

Post by glasswars » Sun Jun 17, 2007 11:18 pm

I just ordered the C Pillar & side marker package..
thisishalcyon.com
@halcyonphoto

sullygully
2GN Member
Posts: 1267
Joined: Mon Aug 08, 2005 8:23 pm
Location: Banff, Alberta

Post by sullygully » Tue Jun 19, 2007 11:16 pm

Just to set the record straight, I can fully vouche for Georges quality of work, and is a great guy to deal with. I regreted not borrowing that rad shroud for the show, as i decided to show my engine after all. But it turns out i didn't need it, as I ended up winning "BEST DOMESTIC". :rockon:

I'll post some pics of the trunk on the car as soon as i can.

rice_eater
2GN Member
Posts: 1521
Joined: Tue Jun 28, 2005 1:25 pm
Location: calgary

Post by rice_eater » Wed Jun 20, 2007 3:44 pm

EclecticBlue wrote:George, are you going to make the PVO/AVS style rear spoiler? I got one from CBD and its such a POS I want one that fits properly and looks good without alot of blemishes!!
maybe on a one off basis, but i took them off my website... i'd kinda rather not :beatstick:
glasswars wrote:I just ordered the C Pillar & side marker package..
i thoght that was you.. i think you'll be happy :thumbup:

Locked

Return to “Vendors / Group Buys”