Woot!wiggyx wrote:So, what this means, folks, is that I can now do 00-02 front badges for all of you!
Custom Badges: GB # 5
- BlackRoseRacing
- 2009 Platinum Contributor
- Posts: 12737
- Joined: Sat Dec 25, 2004 8:58 am
- sidepipe87
- 2009 Silver Contributor
- Posts: 9516
- Joined: Fri May 30, 2008 5:35 pm
- Location: Pittsburgh, PA
- Contact:
I don't actually make the badges. I do the design work and make the templates, then my work is done. While I've run into delays before, it's pretty rare that I get backed up.
Of course I say that as I post from my phone since my modem took a crap and I can't get online with my desktop until I get a new setup up-and-running (which should be first thing tomorrow)
Of course I say that as I post from my phone since my modem took a crap and I can't get online with my desktop until I get a new setup up-and-running (which should be first thing tomorrow)
Back in action. I'm just getting back to the pm's that I got over the weekend, then revising any of the badges that I need to, and then I'll place the order!
Just in case you guys didn't hear, the last batch shipped out last week. Expect them in 3-7 days via 1st class mail (unless you're in Canada, in which case it can often take up to a month )
Just in case you guys didn't hear, the last batch shipped out last week. Expect them in 3-7 days via 1st class mail (unless you're in Canada, in which case it can often take up to a month )
-
- 2GN Member
- Posts: 3371
- Joined: Wed Mar 14, 2007 4:50 pm
you workin on mine or should i PM you?wiggyx wrote:Back in action. I'm just getting back to the pm's that I got over the weekend, then revising any of the badges that I need to, and then I'll place the order!
Just in case you guys didn't hear, the last batch shipped out last week. Expect them in 3-7 days via 1st class mail (unless you're in Canada, in which case it can often take up to a month )
Working on it (actually done with it), but I'm still having web issues.
Modem took a crap on me, bought a new one, it's defective. Hooked up an old crappy modem I have, and there was a problem on AT&T's end (some sort of weird password authentication issue), and I'm trying to get back to the computer store to exchange the new modem. This sort of thing only happens to me it seems. Hopefully I'll have it sorted out in a few hours once I exchange the defective modem.
Modem took a crap on me, bought a new one, it's defective. Hooked up an old crappy modem I have, and there was a problem on AT&T's end (some sort of weird password authentication issue), and I'm trying to get back to the computer store to exchange the new modem. This sort of thing only happens to me it seems. Hopefully I'll have it sorted out in a few hours once I exchange the defective modem.
-
- 2GN Member
- Posts: 3371
- Joined: Wed Mar 14, 2007 4:50 pm
i'm diggin the first one. any way to bump the text up and throw a ram on there by chance?wiggyx wrote:Hudson_Neon wrote:wanna throw me some options together with my screen name on a steering wheel badge? just do some things that you think looks bad ass and we'll go from there.
Not sure exactly what you're after, but do any of these work for ya?
-
- 2GN Member
- Posts: 3371
- Joined: Wed Mar 14, 2007 4:50 pm
- BoostinBen
- 2GN Member
- Posts: 124
- Joined: Sun Jul 10, 2011 7:58 pm
- Location: NEOH
Not sure if you received my text, as we've been having issues as of late, but I want that trunk badge.
As far as a carbon fiber front badge...I really would be interested in a unique Punisher emblem with a bit of a twist to it and in carbon fiber.
As far as a carbon fiber front badge...I really would be interested in a unique Punisher emblem with a bit of a twist to it and in carbon fiber.
'03 SRT-4 = 516 whp courtesy of Wiseco, Crower, DCR, AGP and TDS.
Looking for some new badges for my new theme for my car, in for the next GB when it happens
Project Gossamer
Corn Fed Ext Gated E1
DSP, E1, Turbonetics WG, Ported & Polished Ext Gated Mani, AEM UEGO, 30/30 Boost Gauge, Dogbones, Walbro 255, Perrin FR, AEM CAI, MSD Wires, FP Re-Wire, GReddy BOV w/ EDM pipe, Quickwhips BFMIC, Hurst STS, 3" 02 & DP, Boost Box, WOT Box w/2-Step, 3" SEE, Custom Badges By Wiggy
Corn Fed Ext Gated E1
DSP, E1, Turbonetics WG, Ported & Polished Ext Gated Mani, AEM UEGO, 30/30 Boost Gauge, Dogbones, Walbro 255, Perrin FR, AEM CAI, MSD Wires, FP Re-Wire, GReddy BOV w/ EDM pipe, Quickwhips BFMIC, Hurst STS, 3" 02 & DP, Boost Box, WOT Box w/2-Step, 3" SEE, Custom Badges By Wiggy
Ok dude, just refund me for the other 2 badges since you're not responding...
I'm tired of waiting, i know you got personal shit going on, but who doesnt...
I'm tired of waiting, i know you got personal shit going on, but who doesnt...
Matt Cresto
Fueled By Matt
Fueling Your Passion
Fuel systems turbo kits and components, tuning, performance parts. Contact us for all of your performance needs.
Fueled By Matt
Fueling Your Passion
Fuel systems turbo kits and components, tuning, performance parts. Contact us for all of your performance needs.
- superdan
- 2011 Bronze Contributor
- Posts: 2092
- Joined: Fri May 30, 2008 5:16 pm
- Location: Bridgeport, OH
^^ I recall after his accident he mentioned he wouldnt be visiting SRTforums anymore because of how he was treated about the accident over there. Could be wrong though as I only visit the for sale section of SRTforums....
Although, him being more frequent on SRTforums doesnt explain how I paid for my badge close to a month or more ago and still havent received it. Not saying he is scamming me or anyone else who havent received their badge, but maybe something has happened to him?
Although, him being more frequent on SRTforums doesnt explain how I paid for my badge close to a month or more ago and still havent received it. Not saying he is scamming me or anyone else who havent received their badge, but maybe something has happened to him?
03' Dodge Neon...SRT-4 swap
04' Dodge Dakota SLT 4x4
04' Dodge Dakota SLT 4x4
it's been over 2 months for me....closing in on 3 months... i'm not calling him a scammer, not by any stretch, but i would kinda like to see my badges or my money...
at this point money would be better because i dont know if i'm even getting my EFR7064 anymore because borg warner still hasn't released them...
at this point money would be better because i dont know if i'm even getting my EFR7064 anymore because borg warner still hasn't released them...
Matt Cresto
Fueled By Matt
Fueling Your Passion
Fuel systems turbo kits and components, tuning, performance parts. Contact us for all of your performance needs.
Fueled By Matt
Fueling Your Passion
Fuel systems turbo kits and components, tuning, performance parts. Contact us for all of your performance needs.
- Cokedoctor
- 2GN Member
- Posts: 367
- Joined: Sun Dec 04, 2005 10:12 am
- Location: Western NY
Is this guy still alive? I realize he hasn't responded to this thread over a month now, and people are looking for their paid for product. I'd like to get some of this stuff he's making....if he's still around.
'13 Chrysler 300S 5.7 AWD - the financial burden
'95 Dodge Neon NYG ACR SRT Coupe - 1 of 98
'86 Mitsubishi Starion ESi-R - all original
Official "I'm Going to Drive My Neon till it Dies" Club #000123
'95 Dodge Neon NYG ACR SRT Coupe - 1 of 98
'86 Mitsubishi Starion ESi-R - all original
Official "I'm Going to Drive My Neon till it Dies" Club #000123