Page 1 of 2
custom stock tails
Posted: Fri Sep 15, 2006 11:19 pm
by danielc24
can someone post a pic of they're custom stock tailights
Posted: Fri Sep 15, 2006 11:39 pm
by ilpadrino
If they're custom, it's not technically "stock." You also meant to say "their" and not "they're."
Just messin' with ya

.
Anyway, there's a couple of guys here who tinted part of the stock tails (which I think looks great) but other than that i don't know many custom stock tails off the top of my head. You can't really do much while maintaining its stock look.
Sorry I didn't contribute to the thread. I'm bored at work.
Posted: Fri Sep 15, 2006 11:59 pm
by tamadrumr88
i prefer 03+ tails with limo black tint across the reverse portion of the tail light
i had that look for about 3 days until i read a report regarding against the use of tint on plastic
Posted: Sat Sep 16, 2006 3:06 am
by danielc24
i just wanted to see the stock lights tinted, i've seen them on here before on a gold neon but i can't find the pic
Posted: Sat Sep 16, 2006 11:12 am
by scneonchic
That would be neonix's car probably. she has lots of picture threads in the picture section.
Posted: Sat Sep 16, 2006 12:14 pm
by quicksilvr
I took the light housing apart and tinted the inside of the lense. It was kind of tedious, but well worth it in my opinion. You just have to be very very careful not to chip the lense when you're prying it off. I heated mine in the oven at the lowest temp the oven would set to for about 2-3 minutes to get the adhesive to soften up. A heat gun works too, but again, you have to be careful not to melt anything.
Tinting the outside can look good also, but you really have to clear coat it after the tint, or the finish is kind of dull.
Posted: Sat Sep 16, 2006 2:24 pm
by kc2005ptgt
Here is a picture of some VHT tint and about 3 coats and 4 coats of clear. VERY dark in the daytime, but can see well at night!

Posted: Sat Sep 16, 2006 2:33 pm
by scneonchic
what type of clear did you use? I just finished tinting mine. did 2 coats of tint, 3 coats of duplicolor clear , but mine are not that glossy right now.
Posted: Sat Sep 16, 2006 3:21 pm
by quicksilvr
You might have to use some polish to shine up the clear. I know polishing and waxing my tails did wonders.
Posted: Sat Sep 16, 2006 3:35 pm
by TNK
neonchic, talk to Amit (03_SXT) he does really nice tinted tails, he could prolly give you some tips.
Posted: Sat Sep 16, 2006 3:36 pm
by scneonchic
Ill have to try that. Right now, Im going to auto zone to see if they have an 3157 led bulbs for my taillights....can barely see the stock ones.
Posted: Sat Sep 16, 2006 3:38 pm
by TNK
LEDs are not any better... i had them.. i put stockers back in...

Posted: Sat Sep 16, 2006 3:48 pm
by scneonchic
hmmm....that sucks to hear

I only used 2 coats and you can barely see the light.
I posted at the same time as you before...but I will pm him and see waht he says. or if he sees this before I can pm him, maybe he'll chime in.
thanks tnk!
Posted: Sat Sep 16, 2006 4:12 pm
by TNK
no prob! good luck!
Posted: Sat Sep 16, 2006 5:37 pm
by LaidNeon
here's mine from back in the day. i took the stock lenses off & put on the blackout lenses in its place

Posted: Sat Sep 16, 2006 5:52 pm
by Mopar00Neon
Heres my export tails, where I tinted the amber turn signal portion.
And here are my stock US tails, where I used clear red tint and tinted the reverse light red.

Posted: Sat Sep 16, 2006 6:28 pm
by kc2005ptgt
Oooooooohhh.... that all red looks hawt! I would love to do that to me car :drool: What did you use? /threadjack
also, I used duplicolor clear, scneonchic... I also sanded it with 2k grit between coats of clear and paint. I do not like the look on my car because there was some run off, and even though it was smooth, there was swirls.

Posted: Sat Sep 16, 2006 10:18 pm
by scneonchic
I didnt have any runs in mine...did have some swirls, but Im going to take them back off one afternoon and wet sand them w/ 2000 and polish and wax them. Im very happy with them though. I should have pictures monday.
Posted: Sun Sep 17, 2006 7:11 am
by TNK
i had a set of all red tails too...
Testors model paint. transparent red.
Posted: Sun Sep 17, 2006 11:25 am
by J-Villa
Mopar00Neon wrote:
so hot

Posted: Sun Sep 17, 2006 3:00 pm
by TNK
my tinted tails on my 04
Posted: Sun Sep 17, 2006 9:57 pm
by NiteHawk
ilpadrino wrote:If they're custom, it's not technically "stock." You also meant to say "their" and not "they're."
Just messin' with ya

.
Anyway, there's a couple of guys here who tinted part of the stock tails (which I think looks great) but other than that i don't know many custom stock tails off the top of my head. You can't really do much while maintaining its stock look.
Sorry I didn't contribute to the thread. I'm bored at work.
AHEM! i beg to differ

Posted: Mon Sep 18, 2006 10:40 am
by dblsg
Posted: Mon Sep 18, 2006 1:28 pm
by TNK
on a black car, all black FTW!
Posted: Mon Sep 18, 2006 5:00 pm
by scneonchic
no tinted brake light sam??

Posted: Wed Oct 04, 2006 2:52 pm
by 01rtgurl
Posted: Wed Oct 04, 2006 3:36 pm
by grambo
Man Jess, where you been? Nice tail BTW.....
Posted: Wed Oct 04, 2006 10:25 pm
by 03sxt
Posted: Wed Oct 04, 2006 10:54 pm
by dblsg
scneonchic wrote:no tinted brake light sam??

wanted to keep it somewha legal

Posted: Sat Oct 07, 2006 11:42 am
by TNK
legal = FTL
comuign from teh guy that wil lose his license again with 1 more ticket.... hrm....
