Striping paint on tails

Supermanneon · Post by **Supermanneon** » Wed Apr 11, 2007 7:14 pm

Just as the topic says i want to strip the clear and the tint on my old OEM tails...Just want to know if its possible without damaging the tail and color that it was originally? thanks!

-Devil- · Post by **-Devil-** » Wed Apr 11, 2007 7:32 pm

yes if you are careful you can put the stripper (i would reccomend trying WD-40 first, if that doesn't work then an odorless mineral spirits) ... on a rag and start wiping it off ... you likly will end up with a dull finish ... get a plastic polish (from 3M) and polish them back up to a shine afterwards...

don't use to harsh of a chemical or you may have to do some sanding to restore the finish.

01WhiteNe0n · Post by **01WhiteNe0n** » Wed Apr 11, 2007 9:58 pm

I would just use paint thiner ...

also the same maker as nightshades makes stuff to take it off.