Page 2 of 2
Posted: Tue Jun 28, 2005 11:29 pm
by TNK
took about 10 minutes. i love it so muxch. i have awanted to do this for a LONG ass time.
Posted: Wed Jun 29, 2005 9:58 pm
by 03sxt
I'm gonna' give mine a go tomorrow again. This time I won't stop until it's done.

Thanks for the pics, too, dblsg!

Posted: Thu Jun 30, 2005 2:50 am
by WiTeOuT
I've gotta print this out, and then give it a try.....gotta love these rigged Light mods.

Hey 03...lemme know how your's turns out allright. Shoot me a PM or something.
Posted: Thu Jun 30, 2005 5:01 pm
by 03sxt

Got it half way done. I still can't get to the driving light wiring. Got the wire spliced, but I'm still having issues gaining access to the driving light wiring. Does anyone know of the location of the wires being run from the driving lights to the interior? Maybe I can grab the power somewhere in between where they hook to the bulbs and where they go inside. Thanks.
I really don't want to yank my front bumper cover.
Posted: Thu Jun 30, 2005 5:31 pm
by TNK
wtf? how hard are you making this! all you gotta do is take the airdam out, and reach up adn tap into the wiring right off the fog light.... why are you going into the interior?
Posted: Thu Jun 30, 2005 7:49 pm
by 03sxt
theneonkid wrote:wtf? how hard are you making this! all you gotta do is take the airdam out, and reach up adn tap into the wiring right off the fog light.... why are you going into the interior?
I'm trying to NOT make it hard. Removing the air dam? Are you referring to the front bumper cover? I was trying NOT to remove pieces of the car. From reading the other posts, nobody removed body parts. And I'm not going to the interior - I just noticed that the FUSE is INSIDE the car which means that the wiring that goes to the driving lights, at some point, go to the interior of the car. I was just wondering if anyone knew where the driving light wires ran on their way into the cabin. Maybe I could tap an easier location rather than ripping parts out from underneath the car. I know this should only be a 15 minute mod, but it's not working that way. Shit's a little hard to get to. Thanks.
Posted: Thu Jun 30, 2005 8:40 pm
by 03sxt
Got it all done! Yay! I removed a few a screws and pulled some plastic and tapped the wires that run across the front of the car from the driver's side to the passenger side lights. Here are some pics before I put everything back together. (I hate my f*cking camera.) Now I definitely have to get some nice shots with the lake in the background after I get 'er waxed up.
And yes, the car is jacked up on the driver's side. Damn lowering springs wouldn't let me under the car.

Posted: Thu Jun 30, 2005 10:39 pm
by 05srt4clone
Looks good, I will have updated pictures tomorrow.
Posted: Fri Jul 01, 2005 2:49 am
by TNK
very nice 03. very nice.
Posted: Fri Jul 01, 2005 11:06 am
by dblsg
Posted: Fri Jul 01, 2005 3:07 pm
by TNK
i got onto a bit of a wiring kick after doing this. i rewired my lighting in the back. i will try and get some pics up later. maybe i'll wait till the rest of the project is done.....
Posted: Fri Jul 01, 2005 3:21 pm
by SILVER-ES
Yeah, I've had my done for quite some time now too.

Posted: Fri Jul 01, 2005 3:22 pm
by TNK
for some reason... i never realized that... but i've seen that pic MANY times... i guess i just thoguht they were aftermarket fogs...
Posted: Fri Jul 01, 2005 3:25 pm
by SILVER-ES
You are right, I was being a smartass. They are aftermarket fogs. Hence the

smiley.
Posted: Fri Jul 01, 2005 3:25 pm
by TNK
i hate the interent. so many different ways to take things

Posted: Fri Jul 01, 2005 3:28 pm
by SILVER-ES
I personally blame the internet for my modding addiction. Before I found the .org and MPx I had no interest in modding my car.
Posted: Fri Jul 01, 2005 3:43 pm
by TNK
hahahahaha. sure. blame the internet. while you're at it, why don't you just blame canada too? i always blame canada. starving children in rwanda.. yeah, that's canada's fault.

i'm kidding Canucks. i love your country... eh.
Posted: Sun Nov 11, 2007 11:34 pm
by jT
raising this from the dead...
would this mod work to power fogs if your car was not wired for fogs in the first place originally?
meaning if i throw on some aftermarket fogs can i ground them to the chassis somewhere and get my power for them doing this mod? id actually want to do it via the headlights so they were only on with headlights and not the markers but its essentially the same thing
or for the sake of wiring safety should i use a relay and get power from the battery?
id want to be using the brightest (whitest) halogen bulbs i cant get for them, dont know if that makes a difference as far as the power draw
Posted: Mon Nov 12, 2007 12:02 am
by kornholio788
Not sure about using the factory wiring but here is a write up i did for new wiring.
http://forum.2gn.org/viewtopic.php?t=25722
Posted: Mon Feb 06, 2012 1:11 pm
by shtoopid
SILVER-ES wrote:I personally blame the internet for my modding addiction. Before I found the .org and MPx I had no interest in modding my car.
I second that!
Posted: Mon Feb 06, 2012 2:43 pm
by occasional demons
Damn, if you are going to bump an old thread, at least do it for a question, or useful info.
Oh, right, I see your user name!
Just kidding, but yeah, please look at the post dates for future reference.

Posted: Mon Feb 06, 2012 10:31 pm
by dblsg
I aprove of the "bump"

Posted: Thu Feb 09, 2012 3:00 am
by Nwoye
It's actually not difficult. you can give it a try