SRT front fascia

ThrIsNoSpork · Post by **ThrIsNoSpork** » Mon Mar 03, 2008 5:45 pm

so i know that i definitely need a new washer bottle but what about the box on the other side? im assuming its a fuse box? can it be moved/cut?

yellowpatrol · Post by **yellowpatrol** » Mon Mar 03, 2008 6:20 pm

I don't think the fuse box goes that low, should just be the air intake. As for if it has to be moved or not, I dunno.

ThrIsNoSpork · Post by **ThrIsNoSpork** » Mon Mar 03, 2008 6:33 pm

its that box below the headlight. it sits right up against the fog holder

ZeroChad · Post by **ZeroChad** » Mon Mar 03, 2008 6:42 pm

On the right? Thats the resonator thats connected to your intake air box. Take that thing out and beat the crap out of it.

You'll notice a more throaty sound without it.

ThrIsNoSpork · Post by **ThrIsNoSpork** » Mon Mar 03, 2008 6:43 pm

orly

thanks dude!
do i have to remove the bumper again to get it out?

ZeroChad · Post by **ZeroChad** » Mon Mar 03, 2008 6:53 pm

No problem.
Nope you can get it out under the fender if you partially remove part of you plastic inner fender. Just unscrew a few screws in your wheel well.

ThrIsNoSpork · Post by **ThrIsNoSpork** » Mon Mar 03, 2008 6:54 pm

cool! im doing that first thing tomorrow

TN.Frank · Post by **TN.Frank** » Mon Mar 03, 2008 7:04 pm

Wow, so that's what a Neon looks like without the front bumper cover on. Saved the pic for future ref.

yellowpatrol · Post by **yellowpatrol** » Mon Mar 03, 2008 7:32 pm

TN.Frank wrote:Wow, so that's what a Neon looks like without the front bumper cover on. Saved the pic for future ref.

Haha yep, they are ugly wouldn't you say? That's my baby during the "honey-chrome" project.

And this is what a Neon looks like with it's dentures out:

OverDrive418 · Post by **OverDrive418** » Mon Mar 03, 2008 7:58 pm

TN.Frank wrote:Wow, so that's what a Neon looks like without the front bumper cover on. Saved the pic for future ref.

Here's some more for ya!

silverneontuner · Post by **silverneontuner** » Mon Mar 03, 2008 8:03 pm

here is a few more for fun.

yellowpatrol · Post by **yellowpatrol** » Mon Mar 03, 2008 8:05 pm

silverneontuner wrote:here is a few more for fun.

and after i was done

TN.Frank · Post by **TN.Frank** » Mon Mar 03, 2008 8:50 pm

So how many and where are the bolts that hold it all on? I might try pulling my front bumper cover so I can re-do the grills I put on it so it'll look better.

OverDrive418 · Post by **OverDrive418** » Mon Mar 03, 2008 8:55 pm

On my 02:
1) If you take out the inner plastic fender liner (wheel well) there are 2 10mm nuts to loosen on either side where the bumper meets the fender.
2) Then 3 more screws for the undertay (plastic radiator bracket cover underneath bumper)
3) Pop it off, just make sure you disconnect the side marker lights before you take it off completely.

I think that's it.

BlackRoseRacing · Post by **BlackRoseRacing** » Tue Mar 04, 2008 6:48 am

I wanna play too

Here's my 02 with the front end stripped.....

Jenni · Post by **Jenni** » Wed Mar 05, 2008 4:02 am