2GN.ORG

Ok I know this has a few other threads around already, but no one has answered my question yet. With the fiberglass SRT skirts offered by American carbon fiber in eBay, I know that the original set sold and I hope it is someone on here because I have some questions.
First of all, do they look alright because I know people have complaints about their carbon fiber have shitty weave and other issues. Secondly, how are your mounting them on the car? If I buy them I plan to do double-sided tape for the door caps, and self tapping screws plus tape for the actual skirts. Just curious if this is the same method you used or did you find something better? Thanks

Mike

Can't you just buy it and if it sucks then return it for a refund?

Yep, I bought the first set.
First, It took like 16 days to get here, but they were wrapped to survive all hell, so no complaints there. As for the skirts, I really like them. I think that I found like one defect on the actual skirts and I will be sanding it off easily. Honestly though, I know very little about fiberglass workmanship.
They come with zero mounting hardware, as you might guess. I haven't even bought anything for it yet, but I agree with the double sided tape/ self-tapping screws. Depending on how secure that is, I may or may not buy/fabricate additional mounting brackets.
The biggest thing that I didn't like was that ebay said it had a "UV Clearcoat" and there is absolutely no clearcoat on the sides. Even if you have a black car, you will have to at least put a clear coat on the sides.
Well, I think that's it. Hopefully all of that answered your question.

If you want i can give you an update when I get these painted and put them on.

Can you post up some close up pictures of those skirts?

I'll try to get some up this week

Alright I just bought the set on eBay. Thanks a lot

Wow no mounting hardware or clearcoat? :\

LilSparkPlug wrote:Wow no mounting hardware or clearcoat? :\

This sounds like a case of fail to me.

I'm going to fab something myself, and they are getting painted anyway so its all good

Mounting hardware....aka $5 at Lowes. Whoopie.

But the clearcoat does certainly suck, that shit is expensive.

Voila

Adionik wrote:Mounting hardware....aka $5 at Lowes. Whoopie.

But the clearcoat does certainly suck, that shit is expensive.

clear is cheap, even for good stuff like PPG or SPI, crappy workmanship is what costs

Mopar65 wrote:I'm going to fab something myself, and they are getting painted anyway so its all good

why bother getting Cf skirts if your gonna paint them anyways?

Unless you were referring to the fiberglass ones

^ Did you read the title? It says "fiberglass". lol

zhneon wrote:Voila

Those pictures are really small and horrible. Can you get some bigger and better pictures?

Tam wrote:^ Did you read the title? It says "fiberglass". lol

zhneon wrote:Voila

Those pictures are really small and horrible. Can you get some bigger and better pictures?

sorta just skimmed through the first post and saw something about cf... 5am posts ftl haha my bad

From the looks of the small bad pictures they look pretty good.

Fixed:I removed the th_ thumbnail code from the links.











Edit: Ah, so they are the Lego Brand side skirts.

Just get them prepped and painted properly and you should be good to go. I'd think. I just don't like fiberglass very much, so lucky me I got some off an SRT.

Those skirts look pretty darn good. Looks kinda sturdy.

Tam wrote:Those skirts look pretty darn good. Looks kinda sturdy.

Get you some.

I actually wish I still had R/T / Mopar skirts. SRT skirts take away from the Neon shape IMO.

FAC3L3SS wrote:SRT skirts take away from the Neon shape IMO.

An egg. I'd rather be without that shape lol.

Ah, so they are the Lego Brand side skirts.

yes, yes they are.

FAC3L3SS wrote:

Tam wrote:Those skirts look pretty darn good. Looks kinda sturdy.

Get you some.

I actually wish I still had R/T / Mopar skirts. SRT skirts take away from the Neon shape IMO.

take your door pieces off look so much better,



would like to see those skirts on the a car though

Uh is that your car ben? MORE SHOTS OF THE BALLER INTERIOR!

Yeah, looks good, but I'd rather have R/T skirts over SRT skirts w/out caps. They look worse that way haha. Also Ben, lower that lip!

The lips not moving anywhere, it bonded on. But the top edge is sitting right on the radius of the bumper, I thought I did it right . Car just needs more lower.

Steven: yes my car ,but not my thread so back on topic.

1972demon wrote:

FAC3L3SS wrote:

Tam wrote:Those skirts look pretty darn good. Looks kinda sturdy.

Get you some.

I actually wish I still had R/T / Mopar skirts. SRT skirts take away from the Neon shape IMO.

take your door pieces off look so much better,



would like to see those skirts on the a car though

Do you have anymore pics without the srt skirt door pieces? I've been wondering how that'd look.

Steven: yes my car ,but not my thread so back on topic.[/quote]

Feel free to talk about it, I don't care its sexy. Thread creator approved

UriahRR wrote: Do you have anymore pics without the srt skirt door pieces? I've been wondering how that'd look.

I will see if I can find some, car currently covered in snow. I have the door piece just haven't put them on, but don't know if I'm going too. If I do me and faceless would have twins, except his lip is done right I guess

And my shit is dumped! Haha