Page 1 of 1
HID question.
Posted: Tue Jan 19, 2010 10:36 pm
by redsrt4
Ok here's the deal. Where can i get a conversion harness that goes from the stock bulb(9007) to H1. I have projectors and H1 HID's but i need a harness to go from 9007 to H1. Where can i get this. Thanks in advance.
Posted: Tue Jan 19, 2010 10:39 pm
by heydockyle
Why? All the Hid's use the same type of plug..?
The projectors that you have should have came with a plug.
Maybe I'm missing something lol.
Posted: Wed Jan 20, 2010 8:39 am
by Jenni
no they don't come with the same plug.
But your HID-kit should come with 2 little plugs that you plug directly into the headlights where the H1 bulb used to sit.
Hmmm, sounds weird, you should read the hid-manual!
You see it? The new bulb and the blue and black wire go all into the headlight.
The bulb sits in the socket and the wires have to be connected to the original headlight wires!
So no need for an extra harness!
Here is a step-by-step:
http://www.advrider.com/forums/showthread.php?t=450283
Posted: Wed Jan 20, 2010 10:16 am
by LilSparkPlug
Just buy a 9007 relay harness off ebay or theretrofitsource.com that will fix your issue.
Posted: Wed Jan 20, 2010 11:13 am
by nicklaneSXT
LilSparkPlug wrote:Just buy a 9007 relay harness off ebay or theretrofitsource.com that will fix your issue.
+1 i got my whole H1 hid kit and 9007 relay harness off of vvme.com
$88 for everything including shipping
6000K btw
Posted: Wed Jan 20, 2010 11:14 pm
by heydockyle
Jenni wrote:no they don't come with the same plug.
But your HID-kit should come with 2 little plugs
Those two plugs are the ones that I was saying are the same..