2GN.ORG

For any of you guys running bi-xenons. Do the hi and low seem to work right?

On mine the low beam looks like the high beam, and the high beam looks like the low beam?

The high beam is more of a concentrated light pointing only on the road.
The low beam shoots up much higher lighting up farther, and lighting up more trees and shit.

Ur shits reversed?

That's what it seems like, but it's impossible.

The connector that moves the bulb in and out only plugs in one way. I tried reversing the high beam and low beam wire around, but that didn't change anything for some reason??

Also, when my low beams are on, the bulb goes down. When I turn my highs on, the bulb comes out.

Swap the blue and white wires in the blue connector on the harness it's pinned for a 9004 not a 9007.

Crystal to the rescue as usual. I'll do it when I get off work tonight, thanks.

So the wires are swapped between 9004 and 9007? Interesting. I know the plugs are the same for both and I assumed the pins were in the same places

Guess not. The middle wire and an outside wire need switched.

I've found it on my boyfriends Durango, the Neon and the SXT....every harness I've bought has had the same issue so I'm assuming all 9007s are pinned differently and that these are pinned for a 9004.

Good to know

heydockyle wrote:Guess not. The middle wire and an outside wire need switched.

Told you!!

I was reversing the wrong wires lol

read here
http://www.srtforums.com/forums/f123/hi ... gh-544685/

Them guys over there were non-believers lol

Yeah they were....

Fixed it, thanks.