Page 1 of 1
Custom Emblems
Posted: Fri May 07, 2010 7:23 pm
by pulmeova
Has anyone ever ordered anything from this site.
http://www.24designs.net/
I orignally found them selling emblems on Ebay.
Posted: Fri May 07, 2010 8:28 pm
by hansken_yo
A local guy here did and I will be here in the future. The work looked pretty good from what I saw.
Posted: Fri May 07, 2010 9:53 pm
by Swordfish2Cowboy
I will eventually.
Posted: Sat May 08, 2010 1:50 pm
by sirvaliant_98
thats where i ordered my snail boost front emblem, lol. I didnt realize though that the srt front and reg neon front emblems where different sizes so i had to trim mine down to fit my r/t grille. quality wise though so far seems to be just fine. I clear coated mine for added protection though.
Posted: Sat May 08, 2010 4:01 pm
by pulmeova
I just recieved an email back from the company. They said that they would size the emblems to whatever specification I needed. I think I'm going to give them a try.
Posted: Sat May 08, 2010 4:13 pm
by SlvrACR
I have both the steering wheel and bumper emblem. Both he did a great job
Posted: Sat May 08, 2010 10:16 pm
by mattern248
same here i have the red mopar m with a black background and a same thing but black/ sivler for the sterring wheel very good quaility
Posted: Sat May 08, 2010 10:37 pm
by z3roneo
Might me a newbie question, but are the 00-02 front badge the same size as the 03+ neon/non srt??
Posted: Sun May 09, 2010 1:14 am
by mattern248
i believe the regular neon badges are smaller then the srt badge but not sure send me the messurements of yours and i will also take some of mine for comparision
Posted: Sun May 09, 2010 1:38 pm
by z3roneo
I know for a fact that the srt nadge is bigger than the non srt's..
Here's pics and dims of the 02 badge..
Height from the center is about 1 7/8"...
Width from the top is about 1 7/8"...
Width then narrows down to about 1 3/4" to the bottom..
I had this badge custom made a while back but was stolen...
It was made out of Aluminum with a vinly graphic on top.. It was originally for a Srt but the vender and I modified to fit the 02 grill..
I'm surprised no vendor has made badges for the non srt's.. I believe they would sell like hot cakes..
Posted: Sun May 09, 2010 3:09 pm
by mattern248
Posted: Mon May 10, 2010 12:18 pm
by warphead
i bought one from there about a year ago and the black plastic has already started to fade. if i were to get another badge i would spend the extra money and buy a billet one. and no, there has been no wax applied to my badge for the black to fade. also had to email him a few times before he actually shipped the badge.
Posted: Mon May 10, 2010 3:22 pm
by mattern248
oh see i had a good dealing with them. plus i left my bagde on ym back porch for like two weeks and arizona is not a good state for paint and it seems fine but i want it to have a even deeper look so i will be clearing mine a few times
Posted: Mon May 10, 2010 4:24 pm
by warphead
see there is no paint on mine at all, it is a piece of black plastic that has a brushed texture on it with a decal laid over it.
Posted: Mon May 10, 2010 7:33 pm
by SP33DN3ON
A friend of mine got the Chrysler emblem MADE with these guys, and refered me to them. I was sending them e-mails to find out how much would cost to make one and the guy who wrote me back said that they never done a "custom emblem" for anyone.
Just saying.
Posted: Mon May 10, 2010 7:53 pm
by heydockyle
It says right on there website to email them that they can make custom emblems.
Posted: Mon May 10, 2010 7:58 pm
by SP33DN3ON
heydockyle wrote:It says right on there website to email them that they can make custom emblems.
Well the guy said that he cannot make a Chrysler emblem for the Neon, but he did already.. so IDK.
Posted: Tue May 11, 2010 8:55 pm
by lilnicko11
the 00-02 and 03-05 are different sizes. i got one and had to grind down the edges for the perfect fit. but now its great on my 02 ACR. I have the superman one.
Posted: Tue May 11, 2010 11:44 pm
by z3roneo
Thanxs nicko, thats the answer I was looking for..
I'ma have to pick one of these up soon...
Posted: Wed May 12, 2010 12:01 am
by lilnicko11
No problem. I believe when I originally purchased it, the site only had 03+. not sure what they have no. My dad has a grinder in the garage. We didnt do the sides but like the underneath of the slides slightly.
Posted: Wed May 12, 2010 7:02 am
by SlvrACR
warphead wrote:see there is no paint on mine at all, it is a piece of black plastic that has a brushed texture on it with a decal laid over it.
Mine has no vinyl. You either got an old one or diff guy
Posted: Wed May 12, 2010 11:45 am
by warphead
SlvrACR wrote:warphead wrote:see there is no paint on mine at all, it is a piece of black plastic that has a brushed texture on it with a decal laid over it.
Mine has no vinyl. You either got an old one or diff guy
exact same guy because when i bought it, he had them on ebay also but they were more expensive so i bought it from the site. here is a link to the exact one i bought and if you look through it the description it says "These badges are laser engraved plastic, with brushed aluminum." and the aluminum he is talking about is a brushed aluminum appearance vinyl.
http://www.24designs.net/index.php?main ... ucts_id=10
