1st Gen Roof Rack on a 2nd Gen?
1st Gen Roof Rack on a 2nd Gen?
I was wondering if anyone has put a 1st gen roof rack on a 2nd gen.
If someone has.. what exactly needed to be done and are there any pictures?
If someone has.. what exactly needed to be done and are there any pictures?
'02 Chrysler Neon RT - SOHC 50trim+Crane 007 ---DEAD---
'05 Dodge Neon SRT4 - DSP & bolt ons ---SOLD---
'08 Dodge Caliber SRT4 - MS1Kv3
Progress Log
I'd like to know as well.
A guy at work (who just aquired a 2nd gen Neon) was asking me about doing this.
I don't know anyone who's done this, that I'm aware of.
Free bump for this thread.
- Nick
A guy at work (who just aquired a 2nd gen Neon) was asking me about doing this.
I don't know anyone who's done this, that I'm aware of.
Free bump for this thread.
- Nick
-1998 2-dr SOHC MTX= 57mm TB; Maddog STS
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm
Official "I'm Going to Drive My Neon till it Dies" Club #000009
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm
Official "I'm Going to Drive My Neon till it Dies" Club #000009
- superdan
- 2011 Bronze Contributor
- Posts: 2092
- Joined: Fri May 30, 2008 5:16 pm
- Location: Bridgeport, OH
No it wont fit. I guess you could possibly heat it up and mold it. I wanted to use the 1gn roof rack too but I lost interest. Not the greatest picture but when you sit the roof rack on our..."roof's" lol the 2gn is a lot more rounded. Also the side rails for the roof rack are a tad too long and over lap onto the window seals.
The gap is a lot worse than this picture shows.
The gap is a lot worse than this picture shows.
03' Dodge Neon...SRT-4 swap
04' Dodge Dakota SLT 4x4
04' Dodge Dakota SLT 4x4
NOOOOOOO
I need a roof rack for the winter so I don't have to take out my sub every time I go and play snowboards
'02 Chrysler Neon RT - SOHC 50trim+Crane 007 ---DEAD---
'05 Dodge Neon SRT4 - DSP & bolt ons ---SOLD---
'08 Dodge Caliber SRT4 - MS1Kv3
Progress Log
The site wont let me "choose" my car, also I'm afraid of how much it's gonna cost
'02 Chrysler Neon RT - SOHC 50trim+Crane 007 ---DEAD---
'05 Dodge Neon SRT4 - DSP & bolt ons ---SOLD---
'08 Dodge Caliber SRT4 - MS1Kv3
Progress Log
Still won't let me do it. I cant select anything under "fit my car" or at the bottom of the page where it asks you the model, year, etc.Danteneon wrote:I was able to do mine. Just select the year, make and model and check the box that says you have a spare. Next it will ask what kind of rack you are looking for. Click roof. Spend lots of money.
See? Easy.
'02 Chrysler Neon RT - SOHC 50trim+Crane 007 ---DEAD---
'05 Dodge Neon SRT4 - DSP & bolt ons ---SOLD---
'08 Dodge Caliber SRT4 - MS1Kv3
Progress Log
-
- Junior Admin
- Posts: 20310
- Joined: Thu May 03, 2007 12:14 pm
- Location: Ashland Ohio
It works for me, maybe try a different browser?
Or just http://www.yakima.com might work better...
Or just http://www.yakima.com might work better...
QFT!Danteneon wrote: Spend lots of money.
Bill
1999 neon coupe 2.4 swap
2021 Forester
2000 Neon MTX swap with '02 R/T PCMOlha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
1999 neon coupe 2.4 swap
2021 Forester
That worked... But I was cool with a $50 1st gen rack.. but $400 just for the base is not within my budget
'02 Chrysler Neon RT - SOHC 50trim+Crane 007 ---DEAD---
'05 Dodge Neon SRT4 - DSP & bolt ons ---SOLD---
'08 Dodge Caliber SRT4 - MS1Kv3
Progress Log
I wonder, *if* this is possible, or if it would work.....superdan wrote:No it wont fit. I guess you could possibly heat it up and mold it.
The gap is a lot worse than this picture shows.
A decent heat gun, and some patience, might do the trick.....
- Nick
-1998 2-dr SOHC MTX= 57mm TB; Maddog STS
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm
Official "I'm Going to Drive My Neon till it Dies" Club #000009
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm
Official "I'm Going to Drive My Neon till it Dies" Club #000009
-
- Fresh Fish
- Posts: 1
- Joined: Mon Apr 07, 2014 9:51 am
1st gen roof rack
Did that roof rack end up working? I'm thinking about getting one, but wasn't sure if it worked or not...
Re: 1st gen roof rack
Never tried it, ended up getting a rack for a 2gn shortly after this thread was started.BeatsBejar wrote:Did that roof rack end up working? I'm thinking about getting one, but wasn't sure if it worked or not...
'02 Chrysler Neon RT - SOHC 50trim+Crane 007 ---DEAD---
'05 Dodge Neon SRT4 - DSP & bolt ons ---SOLD---
'08 Dodge Caliber SRT4 - MS1Kv3
Progress Log
- caustic neon
- 2GN Member
- Posts: 1517
- Joined: Sun Mar 12, 2006 10:36 am
- Location: Pa
- Contact:
Pics in my progress log, link in my sig.caustic neon wrote:Can you post up some pics of your car with the rack installed?
'02 Chrysler Neon RT - SOHC 50trim+Crane 007 ---DEAD---
'05 Dodge Neon SRT4 - DSP & bolt ons ---SOLD---
'08 Dodge Caliber SRT4 - MS1Kv3
Progress Log
- caustic neon
- 2GN Member
- Posts: 1517
- Joined: Sun Mar 12, 2006 10:36 am
- Location: Pa
- Contact: