"Viper" style exhaust feeler...what do ya think?

supertrick_05 · Post by **supertrick_05** » Sat Apr 29, 2006 2:01 pm

Well, since my car is too low for a side-exit exhaust and I'm not going to do "dual exhaust" like everyone else under the sun, I was thinking of doing something a lil different...let me know what ya think? It's just a photochop...

scneonchic · Post by **scneonchic** » Sat Apr 29, 2006 2:26 pm

I acutally really like that. Almost cant tell its a photoshop...could you get it ran like that because of the gas tank though?

supertrick_05 · Post by **supertrick_05** » Sat Apr 29, 2006 2:27 pm

Yeah, I've seen it done on an SRT before...

MyNeonSaysHi · Post by **MyNeonSaysHi** » Sat Apr 29, 2006 3:32 pm

IMO that looks like a turd. But its original. A point for that.

Anonymous User · Post by **Anonymous User** » Sat Apr 29, 2006 3:41 pm

doesnt borla make an exhaust for that, since a kit has cutouts for the exhuast like thaT?

phenomeneon21 · Post by **phenomeneon21** » Sat Apr 29, 2006 4:07 pm

the kaminari exhaust kit looks exactly like that...i think it sits a lot lower though because it's meant to fit into the kaminari rear which hangs extremely low, but i'm sure you could get an exhaust shop to shorten it and weld it up higher...

http://www.kaminari.com/products/neonexhaust.htm

actually, you'd probably be better off having something custom made, haha, that's just rediculous...$499.99 for a straight exhaust...plus it's not quite what you want...

Paralyzer · Post by **Paralyzer** » Sat Apr 29, 2006 4:46 pm

I peronally like it, but then yet I wouldn't do it. For the simple fact that if you do it like that, then you will have to go back and redo your exhaust if you get a kit. So then to me it would be a waste of time and money considering money is always involed in custom work. Especially something like exhaust work.

supertrick_05 · Post by **supertrick_05** » Sun Apr 30, 2006 2:11 am

Ok, back by popular demand...here's my car photochopped with the Crossfire exhaust tips...I FUGGIN LOVE IT!!!

Now, it's just a matter of finding the tips...

marakka · Post by **marakka** » Sun Apr 30, 2006 4:15 am

That looks definitely different. I don't know if it fits the car or not.... but it looks clean. If you could actually get a finished product looking like that, I'd say go for it.

As for the design..... The kaminari exhaust would never work. The tips are 4" I do believe. A regular SRT exhaust comes over the trailing arm and curves right around perfectly to the middle. You could chop it off right there and extend the pipe out to the bumper.. Weld on tips an you are done.

caustic neon · Post by **caustic neon** » Sun Apr 30, 2006 4:26 am

i like it totaly diff!

03sxt · Post by **03sxt** » Sun Apr 30, 2006 4:51 am

I don't know. I can't tell if I like it or not.

Like everyone else said - It's definitely different.

atom · Post by **atom** » Sun Apr 30, 2006 8:49 am

Hmm the second tips look good, but what if it was one wide tip rather then two?

Ok, maybe thats a bad idea...

Post by **Diablo0** » Sun Apr 30, 2006 10:23 am

no deal on the one wide tip.... reminds me too much of a boxter and like it's gonna throw a turd at you being that the Neon does say 'HI' and have a smiling face. I like to dual Crossfire tips though for some reason... doesn't really look too bad but actually doing it... I dunno

kirktalife · Post by **kirktalife** » Sun Apr 30, 2006 10:52 am

LOVE the first one, looks awsome, second one isnt too bad either, last one with the big tip is GAY, imo

supertrick_05 · Post by **supertrick_05** » Sun Apr 30, 2006 11:08 am

Well thanks guys, I appreciate ALL feedback! And some guy told me that I could HAVE his SRT exhaust for FREE if I can pick it up...I'm not gonna let that get by me!

MyNeonSaysHi · Post by **MyNeonSaysHi** » Sun Apr 30, 2006 11:28 am

it's gonna throw a turd at you

thats exactly what I was thinking with my first post. Doesn't seem right on a Neon....

dblsg · Post by **dblsg** » Sun Apr 30, 2006 1:11 pm

kirktalife wrote:LOVE the first one, looks awsome, second one isnt too bad either, last one with the big tip is GAY, imo

sullygully · Post by **sullygully** » Sun Apr 30, 2006 2:15 pm

I like the duals man. Very clean looking, like on the mini coopers.

I am still considering doing that to mine(have been for the last 2 years).

It wouldn't be hard at all to fab up one. All you need is a 90 degree pipe coming from where the midsection meets the rear section, to a straight pipe, to another 90 degree, then to dual spliter pipe. You could just clamp it all together first to see how like it, then get it welded after. I've priced it out before for parts and would cost about CA$150.

supertrick_05 · Post by **supertrick_05** » Sun Apr 30, 2006 2:51 pm

Yeah, since I'm getting that SRT exhaust, I could just get rid of the "Y" part and just weld in a straight piece of pipe and throw the tips on...

sullygully · Post by **sullygully** » Sun Apr 30, 2006 4:43 pm

just cut at the y like you said, and weld one of these puppies on..

I want mine to be similar to this, since i have the same kit

MyNeonSaysHi · Post by **MyNeonSaysHi** » Sun Apr 30, 2006 7:23 pm

Now it looks good with a kit....

neon_ert3 · Post by **neon_ert3** » Sun Apr 30, 2006 10:08 pm

i love the idea! it looks great with the crossfire duals

J-Villa · Post by **J-Villa** » Sun Apr 30, 2006 10:38 pm

it's not bad....but then again it's not my style....do it if you like it

WiTeOuT · Post by **WiTeOuT** » Mon May 01, 2006 3:45 am

sullygully wrote:just cut at the y like you said, and weld one of these puppies on..

I want mine to be similar to this, since i have the same kit

WHAT kit is that?? ^^^^ Just wondering.

OH and also, I like the crossfire tips, but only those if I were going to commit myself to actually doing it.

scneonchic · Post by **scneonchic** » Mon May 01, 2006 10:19 am

I think that is the Instigator Kit. Sullygully has it.

01rtgurl · Post by **01rtgurl** » Mon May 01, 2006 11:35 am

do the crossfire tips, but upside down. see how that looks.
/_| |_\
like that lol

supertrick_05 · Post by **supertrick_05** » Mon May 01, 2006 10:13 pm

I think I might go to the local Dodge dealership and see how much the muffler is...or if I can just get the tips themselves. I really wanna do this!

03sxt · Post by **03sxt** » Mon May 01, 2006 10:19 pm

supertrick_05 wrote:I think I might go to the local Dodge dealership and see how much the muffler is...or if I can just get the tips themselves. I really wanna do this!

Better bring a couple wallets.

supertrick_05 · Post by **supertrick_05** » Tue May 02, 2006 5:22 pm

yeah, they said I'd have to buy the whole exhaust system...$700...TOTALLY WORTH IT! wow...fuck that shit!

03sxt · Post by **03sxt** » Tue May 02, 2006 8:51 pm

supertrick_05 wrote:yeah, they said I'd have to buy the whole exhaust system...$700...TOTALLY WORTH IT! wow...fuck that shit!

'Totally worth it?' Or 'fuck that shit?' - I think that'd be a huge waste of money.