license plate light

Welcome to Tell us a little bit about yourself and your car if you'd like.
Post Reply
Fresh Fish
Posts: 0
Joined: Sat Jun 07, 2014 11:48 pm
Location: United States

license plate light

Post by niyawn » Sun Jun 08, 2014 12:03 am

hi guys im new to this website and need some help, i have a 2004 neon sxt that was hit from the rear, fixed and then i bought it, the guys that fixed it didn't wire anything to the license plate, so i went and got a bundle of leds and want to instal them but i just have no idea where to wire the led bundle to. (breaks are out of the question for the obvious) do i have to wire it all the way to the headlights or could i do the speakers in the trunk or something.

give me your suggestions please thanks.

occasional demons
Junior Admin
Posts: 19249
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Sun Jun 08, 2014 9:42 am


You need to locate the black with yellow tracer wire that connects to the tail lights.

The brake light wires are brown/red right side, and dark green/red left side, don't connect to those.

LEDs are polarity sensitive, so if they don't work the first time, try swapping the wires.

Good luck.

For future reference, post any further questions in the Audio/Security/Electrical Section, or the section that applies to your issue. ;)
dblsg wrote:ya'll a bunch of post whores

2001 Neon ES MTX with '02 R/T PCM
Help support 2GN!

Post Reply

Return to “Introduce Yourself!”