Any tricks in connecting the master/slave UPDATE pliers

Doing a SRT-4 Motor swap into your Neon, maybe even a 2.4... have questions about it, what you'll need or what issues you'll run into? Answers can be found in here.
Post Reply
User avatar
dave09092
2GN Member
Posts: 310
Joined: Tue Jul 25, 2006 3:04 am
Location: Las Vegas, NV

Any tricks in connecting the master/slave UPDATE pliers

Post by dave09092 » Wed Dec 05, 2007 6:50 pm

I tried to connect the master/slave cylinder "quick-connect" connection but I could not. It was dark and I didn't want to break anything so I put if off until today. Was I suppose to connect master/slave cylinders before putting the slave cylinder in the transmission? BTW what a PITA is to install the slave cylinder. The slave cylinder had two small black plastic straps holding the push rod. Do I remove those before or after installation?

Thanks,
Dave
Last edited by dave09092 on Thu Dec 06, 2007 3:23 pm, edited 1 time in total.
My cars;

2000 srt-4 swapped 1/27/08 UPDATE runs and drives like a champ :rockon:

Thank you everyone in 2GN.ORG

1996 MTX neon SOLD

My feedback;
viewtopic.php?p=362227#362227

User avatar
Diablo0
2GN.org Owner/Admin
Posts: 12574
Joined: Thu Apr 15, 2004 11:20 pm
Location: Greenville, SC
Contact:

Post by Diablo0 » Thu Dec 06, 2007 9:31 am

Install the slave the way it is without breaking the straps. Once you get the quick connect connected and press ont he clutch pedal it will break those clips away. Best I can remember, you pretty much just push them together and they'll click together.
-Jason
Black '02 Neon R/T | White '02 Neon R/T - SRT-4 Engine Swap
Image
^^^ no, that isn't what I look like haha
Try not to become a man of success but rather to become a man of value. - Albert Einstein

User avatar
apk2k6
2GN Member
Posts: 783
Joined: Thu Nov 17, 2005 6:02 am
Location: Orlando, Fl

Post by apk2k6 » Thu Dec 06, 2007 12:57 pm

Ya push them together. There should be a little white tab, don't try to push that in at the same time, because that's the quick connect mechanism.
2003 Flame Red SE ATX

User avatar
refect
2GN Member
Posts: 1975
Joined: Sun Jul 31, 2005 4:50 pm
Location: Orlando, FL

Post by refect » Thu Dec 06, 2007 2:06 pm

dunno if this will help any, but......

Image
-Brad
Image

User avatar
dave09092
2GN Member
Posts: 310
Joined: Tue Jul 25, 2006 3:04 am
Location: Las Vegas, NV

Thank You All!!!:thumbup:

Post by dave09092 » Thu Dec 06, 2007 3:20 pm

Thank you all but I connect the master and slave cylinders yesterday. I used a pair of pliers and it click right away. Finally, the clutch system works! :D :D :D

Now all I need is the new stage 1 PCM and I'm done. :cussing: Flight system for the delay.
My cars;

2000 srt-4 swapped 1/27/08 UPDATE runs and drives like a champ :rockon:

Thank you everyone in 2GN.ORG

1996 MTX neon SOLD

My feedback;
viewtopic.php?p=362227#362227

User avatar
clackattack44
2GN Member
Posts: 60
Joined: Tue Feb 27, 2007 1:32 am
Location: Eugene, OR

Post by clackattack44 » Sun Dec 09, 2007 5:39 pm

GOT IT.

you just need to reef on it
If we tune your NOS timer, you'll be runnin 9's.
He has enough NOS to blow himself up

HAHA

User avatar
dave09092
2GN Member
Posts: 310
Joined: Tue Jul 25, 2006 3:04 am
Location: Las Vegas, NV

Post by dave09092 » Mon Dec 10, 2007 12:48 am

clackattack44 wrote:GOT IT.

you just need to reef on it
I used a pair of pliers.
My cars;

2000 srt-4 swapped 1/27/08 UPDATE runs and drives like a champ :rockon:

Thank you everyone in 2GN.ORG

1996 MTX neon SOLD

My feedback;
viewtopic.php?p=362227#362227

User avatar
clackattack44
2GN Member
Posts: 60
Joined: Tue Feb 27, 2007 1:32 am
Location: Eugene, OR

Post by clackattack44 » Mon Dec 10, 2007 12:58 am

likewise...
If we tune your NOS timer, you'll be runnin 9's.
He has enough NOS to blow himself up

HAHA

User avatar
dave09092
2GN Member
Posts: 310
Joined: Tue Jul 25, 2006 3:04 am
Location: Las Vegas, NV

Post by dave09092 » Mon Dec 10, 2007 1:03 am

clackattack44 wrote:likewise...
Do you have an srt-4 or an srt-4 swapped neon?
My cars;

2000 srt-4 swapped 1/27/08 UPDATE runs and drives like a champ :rockon:

Thank you everyone in 2GN.ORG

1996 MTX neon SOLD

My feedback;
viewtopic.php?p=362227#362227

Post Reply

Return to “Motor Swap”